Error when deploying simulink model to Arduino

조회 수: 61(최근 30일)
Hello I'm using the built-in example of MATLAB to make an LED blink with Arduino. When I deploy it, it gives me a big error. I attached a text file of the error log. Could you please tell me how to fix that?
Thank you >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
=== Build (Elapsed: 8 sec) === ### Starting build procedure for model: arduino_gettingstarted Error:C:/ProgramData/MATLAB/SupportPackages/R2017a/3P.instrset/arduinoide.instrset/arduino-1.6.13/hardware/tools/avr/bin/avr-g++ -std=gnu++11 -fpermissive -fno-exceptions -fno-threadsafe-statics -c -g -w -ffunction-sections -fdata-sections -MMD -DARDUINO=10613 -MMD -MP -MF"MW_digitalio.dep" -MT"MW_digitalio.o" -Os -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -D_RUNONTARGETHARDWARE_BUILD_ -DMODEL=arduino_gettingstarted -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DTID01EQ=0 -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DRT -DMW_TIMERID=1 -DMW_PRESCALAR=256 -DMW_TIMERCOUNT=59286 -DMW_SCHEDULERCOUNTER=1 -D_RTT_BAUDRATE_SERIAL0_=9600 -D_RTT_ANALOG_REF_=0 -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DTID01EQ=0 -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -DRT -DMODEL=arduino_gettingstarted -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -IF:/HelloMeo -IC:/ProgramData/MATLAB/SupportPackages/R2017a/toolbox/target/supportpackages/arduinobase/include -IF:/HelloMeo/arduino_gettingstarted_ert_rtw -IC:/ProgramData/MATLAB/SupportPackages/R2017a/toolbox/target/supportpackages/arduinotarget/arduinotargetdemos -IF:/Program Files/MATLABR2017a/extern/include -IF:/Program Files/MATLABR2017a/simulink/include -IF:/Program Files/MATLABR2017a/rtw/c/src -IF:/Program Files/MATLABR2017a/rtw/c/src/ext_mode/common -IF:/Program Files/MATLABR2017a/rtw/c/ert -IC:/ProgramData/MATLAB/SupportPackages/R2017a/3P.instrset/arduinoide.instrset/arduino-1.6.13/hardware/arduino/avr/cores/arduino -IC:/ProgramData/MATLAB/SupportPackages/R2017a/3P.instrset/arduinoide.instrset/arduino-1.6.13/hardware/arduino/avr/variants/standard -IC:/ProgramData/MATLAB/SupportPackages/R2017a/3P.instrset/arduinoide.instrset/arduino-1.6.13/libraries/Servo/src -IC:/ProgramData/MATLAB/SupportPackages/R2017a/toolbox/target/supportpackages/arduinotarget/include -IC:/ProgramData/MATLAB/SupportPackages/R2017a/toolbox/target/supportpackages/arduinotarget/scheduler/include -IC:/ProgramData/MATLAB/SupportPackages/R2017a/3P.instrset/arduinoide.instrset/arduino-1.6.13/hardware/tools/avr/avr/include/avr -IC:/ProgramData/MATLAB/SupportPackages/R2017a/toolbox/target/shared/externalmode_daemon/include -o MW_digitalio.o C:/ProgramData/MATLAB/SupportPackages/R2017a/toolbox/target/supportpackages/arduinobase/src/MW_digitalio.cpp avr-g++: error: Files/MATLABR2017a/extern/include: No such file or directory avr-g++: error: Files/MATLABR2017a/simulink/include: No such file or directory avr-g++: error: Files/MATLABR2017a/rtw/c/src: No such file or directory avr-g++: error: Files/MATLABR2017a/rtw/c/src/ext_mode/common: No such file or directory avr-g++: error: Files/MATLABR2017a/rtw/c/ert: No such file or directory gmake: * [MW_digitalio.o] Error 1 ### Build procedure for model: 'arduino_gettingstarted' aborted due to an error. Error:Error(s) encountered while building "arduino_gettingstarted": ### Failed to generate all binary outputs.
  댓글 수: 2
table 2017년 7월 28일
hello,Do you solve this problem? how to do with this, thank you!

댓글을 달려면 로그인하십시오.

채택된 답변

Raj Manandhar
Raj Manandhar 2018년 9월 10일
I also had similar issues while using the Arduino Engineering Kit. Looking at the comment from Francis. I found out that the problem for me was that my current folder name (Engineering Kit) had space in between its name. So essentially when I changed it to (Engineering_Kit) it started working.
  댓글 수: 1
Alexis Javier Mayo
Alexis Javier Mayo 2019년 3월 4일
Thank you! I was very stressed because I couldn't fix this error. I removed all spaces and it runs ok.

댓글을 달려면 로그인하십시오.

추가 답변(2개)

Francis GROSBOIS 2017년 11월 16일
I had the same problem, due to the name of the directory "séquentiel", i am french. Changed in "sequentiel" and all is ok.

Kamlesh Vaghela
Kamlesh Vaghela 2018년 12월 30일
How to Solve this Error?
It appears as though pwd (C:\Users\kamle\OneDrive\Documents\MATLAB) contains an existing build folder, while the root build folder in Simulink.fileGenControl is set to another folder. The build folder in pwd may shadow build artifacts in the root build folder and cause unexpected errors. Consider CDing to a folder that does not contain an existing build folder prior to initiating a build. The Build Process will terminate.
  댓글 수: 1
Walter Roberson
Walter Roberson 2018년 12월 30일
Either remove the build folder in the directory C:\Users\kamle\OneDrive\Documents\MATLAB, or else cd to a different directory that does not have a build folder in it, or else reconfigure Simulink.fileGenControl to use C:\Users\kamle\OneDrive\Documents\MATLAB as the build directory.

댓글을 달려면 로그인하십시오.


Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by