How can I simulate a load with DC comsumption in SimPowerSystem?
조회 수: 5 (최근 30일)
이전 댓글 표시
Hello my friends, I´m doing a circuit or model with a cell array and a battery in order to simulate the consumption of a home, but I have not get to do it because SPS use only loads RLC and and it works with a RMS voltage and I want to connect it to a DC supply directly, what would you do in order to solve this issue.
If we try to connect the software does not allow it, because seems be an incompatibility beetwen both softwares SPS and SCS.
I´ve tried to use a R Load from SCS and I have not get solve it yet, I am thinking than it is not good to combine SPS with SIMELECTRONICS because appear more issues, what can I do for modelize a load consumption in DC?
댓글 수: 1
채택된 답변
Sebastian Castro
2015년 10월 19일
First off, SimPowerSystems Specialized Technology has the blocks (I think) you need:
- DC Voltage Source
- Series RLC Load or Series RLC Branch -- just set the L and C values (or reactive power Q, depending on which block) to 0 and you have yourself a resistor.
Also, if there are other Simscape/SimElectronics blocks that you absolutely must have, there are interface blocks between Simscape and SimPowerSystems Specialized Technology. I wouldn't recommend using these unless you really have to, as they go through Simulink signals first and therefore affect the "physicality" or numerical stability of the model... but they exist.
- Sebastian
댓글 수: 2
Guanwei Zeng
2021년 3월 11일
편집: Guanwei Zeng
2021년 3월 11일
Have you solved the error: At time 0.000000, an assertion is triggered. Supply-side current exceeded the Maximum expected supply-side current. I came across the same error while modeling. Thank you.
https://www.mathworks.com/matlabcentral/answers/248976-how-can-i-simulate-a-load-with-dc-comsumption-in-simpowersystem#comment_317316
추가 답변 (0개)
커뮤니티
더 많은 답변 보기: Power Electronics Community
참고 항목
카테고리
Help Center 및 File Exchange에서 Electrical Sensors에 대해 자세히 알아보기
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!