![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/779528/image.png)
Time dependent matrix entry
조회 수: 1 (최근 30일)
이전 댓글 표시
Good day,
I've got a repeating sequence block with a 1x2-matrix for the durations of the output values. I however need to change these values, each entry, according to a ramp function that implements a linear increase. Below is a setup of the model I currently have in Simulink.
Any idea on how I can achieve this?
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/779293/image.png)
댓글 수: 0
채택된 답변
Jon
2021년 10월 26일
편집: Jon
2021년 10월 26일
Under source blocks in the Simulink library there is a block called Ramp. It seems like this should work for your purpose.
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/779528/image.png)
댓글 수: 6
Jon
2021년 10월 27일
편집: Jon
2021년 10월 27일
I now see you want the square wave to go from say 0 to 5 rather than -1 to 1. You can just add 1 to the output of the sign block (using a sum block and constant) and then scale it with a gain block.
If you need the on and off (low and high values) duration to be different, you can offset the chirp signal (add a constant) before you apply the sign function.
추가 답변 (0개)
참고 항목
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!