Display precision vs actual precision
조회 수: 6 (최근 30일)
이전 댓글 표시
Hi everyone We are running some simulations in MATLAB and storing the results afterwards. Yet, we are concerned that the actual precision of the number format used to solve the equations might be huge with respect to what we actually need. For instance, one of the output variables of the program is voltage, which is bound to -120<=V<=40 and we require a max resolution of about 0.01, no more than that....my guess is that the number precision provided by MATLAB is exceeding our needs and this is costing us computing time.....
any comments on this?
thanks!
mario
댓글 수: 2
Sara
2014년 7월 30일
It's preferable to do all your calculations with higher precision than needed and only round the results. You may use single variables instead of the default (double) but I'm not sure you'll have any speed up. You could build a toy problem and check it out.
Seth Wagenman
2014년 9월 3일
Do the toy problems below convince you that speed will increase if you use single variables vs. doubles?
채택된 답변
Image Analyst
2014년 8월 2일
편집: Image Analyst
2014년 8월 2일
Your only choices are to cast your variables to single or double. The calculations will take the same amount of time no matter if you use "format long" or "format short" - the number of decimal places upon output do not have any effect on what's being used in the mathematical operations. Using single will cut your memory usage down by half.
Using single will make the calculations faster. See this demo:
m1 = rand(12345,12345);
m2 = rand(size(m1));
tic;
for expt = 1 : 10
m3 = m1 .* m2;
end
toc;
m1 = single(m1);
m2 = single(m2);
tic;
for expt = 1 : 10
m4 = m1 .* m2;
end
toc;
The results:
Elapsed time is 2.756050 seconds.
Elapsed time is 1.518655 seconds.
댓글 수: 2
Seth Wagenman
2014년 9월 3일
편집: Seth Wagenman
2014년 9월 3일
I do not know what "expt" and the loop was for (and my computer froze when I tried the script above) so I tried this and got similar results:
m1 = rand(999,999);
m2 = rand(size(m1));
tic
m3 = m1 .* m2;
toc
m1 = single(m1);
m2 = single(m2);
tic
m4 = m1 .* m2;
toc
Elapsed time is 0.011342 seconds.
Elapsed time is 0.007512 seconds.
추가 답변 (1개)
Andrew Reibold
2014년 7월 30일
편집: Andrew Reibold
2014년 7월 30일
To round to the hundredths place
X_rounded_to_hundredth = round(X*100)/100
Matlab still stores '0's after though. Not sure if you can increase computing time.
댓글 수: 6
Image Analyst
2014년 8월 2일
I've heard that (because modern CPUs are so highly optimized that it doesn't matter), so that's why I wrote my code - to test it. Surprisingly I found, at least for that one example, that the single calculations took about half as long, though perhaps it might be dues to a memory thrashing issue due to larger arrays rather than purely due to the multiplication times. I should test that.
Seth Wagenman
2014년 9월 3일
One problem with single variables...if they are ever part of any future calculation, all products become single variables as well, even if a double were part of the calculation.
참고 항목
카테고리
Help Center 및 File Exchange에서 Logical에 대해 자세히 알아보기
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!