SimHydraulics centrifugal pump module
조회 수: 2 (최근 30일)
이전 댓글 표시
Specific data pump has a flow rate of 168 m³ / h, speed of 2950 r / min, head of 260 m, the inlet pressure of 0.25 MPa, outlet pressure of 2.3 MPa. How to set parameters in the centrifugal pump module ~
泵的具体数据有流量为168 m³/h,转速为2950 r/min,扬程为260 m,入口压力为0.25 MPa,出口压力为2.3 MPa。怎么在泵模块中设置参数~最好是离心泵模块~
댓글 수: 0
답변 (1개)
noman shah
2015년 12월 8일
use the data in 2D tabular form in the pump dialog box.
use [168/3600;168/3600] in the pump delivery vector and select unit m3/s
the pressure difference across pump you have to enter in the parameter is [2.3e6-0.25e6;2.3e6-0.25e6]
댓글 수: 0
참고 항목
카테고리
Help Center 및 File Exchange에서 Two-Phase Fluid Library에 대해 자세히 알아보기
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!