The examples featured here show you how to connect SDR hardware with the WLAN Toolbox™. For more information about supported SDR platforms, see Communications Toolbox Supported Hardware (Communications Toolbox).
Use the Xilinx® Zynq-based radio support package with MATLAB® and WLAN Toolbox™ to generate a simultaneous transmission and reception on a single SDR platform.
Use the Universal Software Radio Peripheral (USRP®) device using SDRu (Software Defined Radio USRP®) System objects™ to implement a WLAN receiver. The receiver is able to recover 802.11™ OFDM non-HT beacon frames transmitted over the air from commercial 802.11 hardware.
Transmit and receive WLAN packets on a single radio platform, USRP® Embedded Series Radio Support Package with MATLAB® and WLAN Toolbox™. An image file is encoded and packed into WLAN packets for transmission, and subsequently decoded on reception.
Transmit and receive WLAN packets on a single PlutoSDR device, using the Communications Toolbox™ Support Package for ADALM-PLUTO Radio and the WLAN Toolbox™. An image file is encoded and packed into WLAN packets for transmission, and subsequently decoded on reception.
아래 MATLAB 명령에 해당하는 링크를 클릭하셨습니다.
이 명령을 MATLAB 명령 창에 입력해 실행하십시오.
웹 브라우저에서는 MATLAB 명령을 지원하지 않습니다.
Choose a web site to get translated content where available and see local events and offers. Based on your location, we recommend that you select: .
You can also select a web site from the following list:
Select the China site (in Chinese or English) for best site performance. Other MathWorks country sites are not optimized for visits from your location.
Contact your local office