This example shows how to train a feedforward neural network to predict temperature.
ThingSpeak™ channel 12397 contains data from the MathWorks® weather station, located in Natick, Massachusetts. The data is collected once every minute. Fields 2, 3, 4, and 6 contain wind speed (mph), relative humidity, temperature (F), and atmospheric pressure (inHg) data, respectively. Read the data from channel 12397 using the
data = thingSpeakRead(12397,'Fields',[2 3 4 6],'DateRange',[datetime('January 7, 2018'),datetime('January 9, 2018')],... 'outputFormat','table');
Assign input variables, and calculate dew point from temperature and relative humidity to use as the target. Convert temperature from Fahrenheit to Celsius, and specify the constants for water vapor (b) and barometric pressure (c). Calculate the intermediate value 'gamma', and assign target values for the network.
inputs = [data.Humidity'; data.TemperatureF'; data.PressureHg'; data.WindSpeedmph']; tempC = (5/9)*(data.TemperatureF-32); b = 17.62; c = 243.5; gamma = log(data.Humidity/100) + b*tempC ./ (c+tempC); dewPointC = c*gamma ./ (b-gamma); dewPointF = (dewPointC*1.8) + 32; targets = dewPointF';
feedforwardnet function to create a two-layer feedforward network. The network has one hidden layer with 10 neurons and an output layer. Use the
train function to train the feedforward network using the inputs.
net = feedforwardnet(10); [net,tr] = train(net,inputs,targets);
After the network is trained and validated, you can use the network object to calculate the network response to any input, in this case the dew point for the fifth input data point.
output = net(inputs(:,5))
output = -15.6383