이 페이지는 기계 번역을 사용하여 번역되었습니다. 최신 내용을 영문으로 보려면 여기를 클릭하십시오.
모델링
R2025b하드웨어 연결을 위한 Simulink® 모델을 준비하고, 하드웨어 프로토콜 지원을 위한 블록을 추가하고, 다양한 응용 사례를 다루는 예제를 참조합니다.
블록
 | Digital Read | Read logical state of digital input pin |
 | Digital Write | Set logical state of digital output pin |
 | Analog Input | Measure voltage of analog input pin |
 | PWM Output | Generate square wave on the specified output pin |
 | I2C Master Read | Read data from I2C Peripheral devices or I2C Peripheral devices register |
 | I2C Master Write | Write data to I2C peripheral devices or I2C peripheral devices register |
 | SPI Register Read | Read data from SPI peripheral devices register |
 | SPI Register Write | Write data to registers of SPI peripheral devices |
 | SPI Master Transfer | Write data to and read data from SPI peripheral devices |
 | SCI Read | Read N-by-1 array of data on UART |
 | SCI Write | Send N-by-1 array of data to UART |
 | MMA8652FC 3-Axis Accelerometer | Get measurement of linear acceleration along the X, Y, and Z axes of the MMA8652FC 3-Axis chip |
 | Accelerometer X-Y-Z | Get measurement of linear acceleration along the X, Y, and Z axes of the Accelerometer (R2023b 이후) |
 | MAG3110 3-Axis Magnetometer | Get measurement of magnetic field along the X, Y, and Z axes of the MAG3110 3-Axis chip |
 | Magnetometer X-Y-Z | Get measurement of magnetic field along the X, Y, and Z axes of the Magnetometer (R2023b 이후) |
 | 5x5 LED Matrix | Output 5x5 LED image on board |
 | LED Text Scroll | Create scrolling text for BBC micro:bit |
 | Radio Receive | Receive data from micro:bit devices via radio |
 | Radio Transmit | Transmit data to micro:bit devices via radio |
 | Note Generator | Generate frequency corresponding to a musical note |
 | Play Note | Play musical note on specified pin on BBC micro:bit |
도움말 항목
- Model Configuration Parameters for BBC micro:bit
Parameter and configuration options for creating and running applications on the target hardware.
- Tune and Monitor Model Running on Hardware
This example shows you how to use the External mode (Monitor and Tune) to tune parameters and monitor a Simulink® model running on your target hardware.
- Getting Started with Simulink Coder Support Package for BBC micro:bit
This example shows you how to use Simulink® Coder™ Support Package for BBC micro:bit to run a Simulink® model on a BBC micro:bit.
- Dice Simulation on LED Matrix
This example shows you how to develop a Simulink® model to implement a Dice Simulation on BBC micro:bit board using the on board Accelerometer sensor and 5x5 LED Matrix.
- Use Tilt Control on BBC micro:bit to Reach to a Target LED
This example shows you how to use a Simulink® model to build a simple game that uses tilt control on BBC micro:bit to reach to a target LED on the LED matrix, and see a happy face LED image upon success.
- Wireless Control Between BBC micro:bit Boards
This example shows you how to use Simulink® models for wireless communication and control between two BBC micro:bit boards.
- Play Tunes and a Piano with a BBC micro:bit
This example shows you how to use Simulink® models to play musical tunes and a piano with BBC micro:bit.
