이 페이지는 기계 번역을 사용하여 번역되었습니다. 최신 내용을 영문으로 보려면 여기를 클릭하십시오.
모델링
R2025b하드웨어 연결을 위한 Simulink® 모델을 준비하고, 하드웨어 프로토콜 지원을 위한 블록을 추가하고, 다양한 응용 사례를 다루는 예제를 참조합니다.
블록
 | Digital Output | Set the logical value of a digital output pin |
| Digital Input | Read the logical value of a digital input pin |
 | RGB LED | Set the RGB LED to a desired color |
 | Serial Receive | Receive an [Nx1] array of byte data on the UART |
 | Serial Transmit | Send an [MxN] array of data to the UART |
 | Analog Output | Send an analog output signal to PTE30 pin |
 | Analog Input | Measure the voltage of an analog input pin |
 | Servo Write | Drive the servo motor to the specified angle |
 | Line Scan Camera | Read the data from a line scan camera |
 | Momentary Switch | Read the state of a momentary switch |
 | DIP Switch | Read the state of a DIP switch |
 | DC Motor | Drive a DC motor in either direction |
 | Potentiometer | Read the state of a potentiometer |
 | Battery Read | Read the battery voltage of a battery connected to the TFC Shield |
 | Battery Indicator | Display the battery voltage level with LEDs on the TFC shield |
 | I2C Controller Read | Read data from I2C peripheral device or I2C peripheral device register |
 | I2C Controller Write | Write data to I2C peripheral device or I2C peripheral device register |
 | PWM Output | Generate square wave on the specified output pin |
도움말 항목
- Model Configuration Parameters for NXP FRDM-KL25Z Board
Parameter and configuration options for creating and running applications on the target hardware.
- Getting Started with Simulink Coder Support Package for NXP FRDM-KL25Z Board
This example shows you how to use Simulink® Coder™ Support Package for NXP FRDM-KL25Z Board to run a Simulink model on a NXP FRDM-KL25Z board.
- Code Verification and Validation with External Mode
This example shows you how to use Simulink® Coder™ Support Package for NXP™ FRDM-KL25Z for code verification and validation using external mode.
- Servo Control with NXP FRDM-KL25Z Board
This example shows how to use the Simulink® Coder™ Support Package for NXP™ FRDM-KL25Z Board to control a servo motor connected to FRDM-TFC Shield.
- Code Verification and Validation with PIL
This example shows you how to use Simulink® Coder™ Support Package for NXP™ FRDM-KL25Z Board for code verification and validation using PIL.
- Read Acceleration Data from MMA8451Q 3-Axis Digital Accelerometer Using I2C
This example shows how to use Simulink® Coder™ Support Package for NXP™ FRDM-KL25Z Board to control the color of the RGB LED based on the orientation of the board.
