MATLAB 도움말 센터
Summarize IF planning results in command window
report(hif)
report(hif) returns the summary of intermediate frequencies (IF) planning results in command window. The summary contains:
hif
The IF location.
The properties of each mixer, including RF center frequencies, bandwidths, mixing type, and intermodulation tables.
The spur-free zones.
example
collapse all
Set up the object
h = OpenIF('IFLocation','MixerOutput');
Add two mixers to the system
IMT1 = [99 0 21 17 26; 11 0 29 29 63; ... 60 48 70 65 41; 90 89 74 68 87; 99 99 95 99 99]; addMixer(h,IMT1,2400e6,100e6,'low',50e6) IMT2 = [99 0 9 12 15; 20 0 26 31 48; ... 55 70 51 70 53; 85 90 60 70 94; 96 95 94 93 92]; addMixer(h,IMT2,3700e6,150e6,'high',50e6)
Check for spur-free zones
report(h)
Intermediate Frequency (IF) Planner IF Location: MixerOutput -- MIXER 1 -- RF Center Frequency: 2.4 GHz RF Bandwidth: 100 MHz IF Bandwidth: 50 MHz MixerType: low Intermodulation Table: 99 0 21 17 26 11 0 29 29 63 60 48 70 65 41 90 89 74 68 87 99 99 95 99 99 -- MIXER 2 -- RF Center Frequency: 3.7 GHz RF Bandwidth: 150 MHz IF Bandwidth: 50 MHz MixerType: high Intermodulation Table: 99 0 9 12 15 20 0 26 31 48 55 70 51 70 53 85 90 60 70 94 96 95 94 93 92 Spur-Free Zones: 6.25 - 8.33 MHz 8.33 - 12.50 MHz 12.50 - 25.00 MHz 25.00 - 465.00 MHz 495.00 - 581.25 MHz 618.75 - 720.00 MHz 760.00 - 775.00 MHz 825.00 - 900.00 MHz 985.00 - 1162.50 MHz 1.27 - 1.41 GHz 1.52 - 1.56 GHz 1.64 - 1.76 GHz 1.97 - 2.17 GHz 2.27 - 2.33 GHz 2.53 - 2.71 GHz 3.07 - 3.12 GHz 3.28 - 3.29 GHz 3.44 - 3.51 GHz 3.80 - 3.91 GHz 4.09 - 4.35 GHz 5.04 - 5.07 GHz 5.29 - 5.43 GHz 5.73 - 5.79 GHz 6.30 - 6.34 GHz 6.61 - 7.03 GHz 7.58 - 8.45 GHz 8.82 - 9.05 GHz 10.08 - 10.85 GHz 11.35 - 11.73 GHz 12.28 - 12.68 GHz 13.23 - 14.08 GHz 15.13 - 18.10 GHz 18.90 - 21.73 GHz
OpenIF
OpenIF object, specified as an object handle.
expand all
The show and report functions of OpenIF object now display mixer spur-free zones from 0 Hz to (M+N)*RF Hz. M and N represent the dimensions of an N-by-M IMT table and RF represents the RF center frequency of the mixer element.
show
report
OpenIF | show
You clicked a link that corresponds to this MATLAB command:
Run the command by entering it in the MATLAB Command Window. Web browsers do not support MATLAB commands.
웹사이트 선택
번역된 콘텐츠를 보고 지역별 이벤트와 혜택을 살펴보려면 웹사이트를 선택하십시오. 현재 계신 지역에 따라 다음 웹사이트를 권장합니다:
또한 다음 목록에서 웹사이트를 선택하실 수도 있습니다.
사이트 성능 최적화 방법
최고의 사이트 성능을 위해 중국 사이트(중국어 또는 영어)를 선택하십시오. 현재 계신 지역에서는 다른 국가의 MathWorks 사이트 방문이 최적화되지 않았습니다.
미주
유럽
아시아 태평양
지역별 지사에 문의