This is machine translation

Translated by Microsoft
Mouseover text to see original. Click the button below to return to the English version of the page.

Note: This page has been translated by MathWorks. Click here to see
To view all translated materials including this page, select Country from the country navigator on the bottom of this page.

Macintosh DCAM IEEE 1394 Hardware

Troubleshooting Macintosh DCAM Devices

If you are having trouble using the Image Acquisition Toolbox™ with a supported Macintosh DCAM IEEE® 1394 hardware acquisition device, try the following:

  1. Verify that your IEEE 1394 (FireWire) camera can be accessed through the dcam adaptor.

    • Make sure the camera complies with the IIDC 1394-based Digital Camera (DCAM) specification. Vendors typically include this information in documentation that comes with the camera. If your digital camera is not DCAM compliant, you might be able to use the Macintosh Video Adaptor.

  2. Install the Image Acquisition Toolbox Support Package for DCAM Hardware.

    Starting with version R2014a, each adaptor is available separately through MATLAB® Add-Ons. See Image Acquisition Support Packages for Hardware Adaptors for information about installing the adaptors.

  3. Verify that your image acquisition hardware is functioning properly.

    You can verify that your hardware is functioning properly by running an external webcam application, for example, Photo Booth or iMovie.

    If you can start the utility, run the utility, and close the utility without encountering any errors, then the toolbox should be able to operate with your image acquisition device. If you encounter errors, resolve them before attempting to use the toolbox with the device.