Distributed Pipeline Insertion for MATLAB Function Blocks
This example shows how to optimize the generated HDL code for MATLAB Function blocks by using the distributed pipelining optimization. Distributed pipelining is an HDL Coder™ optimization that improves the generated HDL code from MATLAB Function blocks, Simulink® models, or Stateflow® charts. By using distributed pipelining, your design achieves higher clock rates on the FPGA device.
Multiplier Chain Model
This example shows how to distribute pipeline registers in a simple model that chains five multiplications.
HDL_DUT Subsystem is the DUT for which you want to generate HDL code. The subsystem drives a MATLAB Function block
To see the chain of multiplications, open the MATLAB Function block.
Apply Distributed Pipelining Optimization
1. Specify generation of two pipeline stages for the MATLAB Function block.
ml_subsys = 'hdlcoder_distpipe_multiplier_chain/HDL_DUT/mult_chain'; hdlset_param(ml_subsys, 'OutputPipeline', 2)
2. Specify the
MATLAB Datapath architecture. This architecture treats the MATLAB Function block like a regular Subsystem. You can then apply various optimizations across the MATLAB Function blocks with other blocks in your Simulink® model.
hdlset_param(ml_subsys, 'architecture', 'MATLAB Datapath');
3. Enable the distributed pipelining optimization on the block. To see the results of the optimization, enable generation of the Optimization Report. To apply the optimization across hierarchies in your model, enable hierarchical distributed pipelining on the model and distributed pipelining on all subsystems.
hdlset_param('hdlcoder_distpipe_multiplier_chain', ... 'HierarchicalDistPipe', 'on', 'OptimizationReport', 'on') hdlset_param('hdlcoder_distpipe_multiplier_chain/HDL_DUT', 'DistributedPipelining', 'on'); hdlset_param(ml_subsys, 'DistributedPipelining', 'on');
You also have the option of using synthesis timing estimates for distributed pipelining for a MATLAB function block with
MATLAB Datapath architecture. Synthesis timing estimates calculate the propagation delays of the components in your design for distributed pipelining. Using this option, you can more accurately reflect how components function on hardware to better distribute pipelines in your design and maximize the clock frequency for your specific target device. For more information, see Distributed Pipelining Using Synthesis Timing Estimates.
To enable synthesis timing estimates for distributed pipelining, use the model parameter Use synthesis estimates for Distributed Pipelining in the HDL Code Generation > Optimization > Pipelining tab in the Configuration Parameters dialog box, or set the parameter using
hdlset_param('hdlcoder_distpipe_multiplier_chain', 'UseSynthesisEstimatesForDistributedPipelining', 'on')
4. Generate HDL Code for the
By default, HDL Coder generates VHDL code in the
Analyze Results of Optimization
In the Distributed Pipelining report, you see that the code generator moved the pipeline registers. To see the effects of the optimization, open the generated model
gm_hdlcoder_distpipe_multiplier_chain and navigate to the
MATLAB Datapath architecture creates a Subsystem in place of the MATLAB Function block. The optimization can then distribute the pipeline registers and the unit delay that you added inside the Subsystem to optimize the multiplier chain and improve timing. Open the