Setup and Configuration
R2026bDownload and install the HDL Coder™ Support Package for Intel® FPGA and SoC Devices to setup and run your MATLAB® or Simulink® algorithm on the Altera® target hardware.
Functions
hdlHardwareSetup | Open the Hardware Setup tool (Since R2025a) |
intelsoc | Connection to processor on Altera SoC board to perform basic Linux shell operations or program the board (Since R2022a) |
Topics
Board Support
- Supported EDA Tools and Hardware
List of supported third-party EDA software, supported boards, and recommended products. - Download and Install HDL Coder Support Package for Intel FPGA and SoC Devices
Installation instructions. - Intel FPGA Board Customization
How to customize board definition files.
Hardware Setup
- Set Up Intel Hardware Boards
Configure and verify your hardware connection, using the guided setup tool.
Troubleshooting
Command Line Session with Altera SoC Device
Instructions on how to open a command line session to an Altera SoC device.
Configure Network Interface Card (NIC) on Development Computer
Configure a Network Interface Card (NIC) on the development computer to connect to hardware board.
Get the IP Address of Altera SoC Device
You can get the IP address of the Altera SoC hardware from the MATLAB Command Window or using the Linux® command line.
Sending PING Request to Altera SoC Device
Process to PING an Altera SoC hardware board connected to your development computer.
Guidelines for Entering Static IP Settings
Guidelines for entering static IP settings.
Description of how the HDL Coder Support Package for Intel FPGA and SoC Devices verifies the setup of the Altera SoC hardware boards.
