답변 있음
I have a problem with connecting Simscape Model PMC Port to Simulink Model PMC Port, (Connecting Simscape Battery Model terminals to PV Model terminals). Is there anybody who can help?
Hello Abdelnasser, there are few issues that must be taken into account to connect wires. 1st, they need to be the same type o...

5년 초과 전 | 1

| 수락됨

답변 있음
Simulating a double sided permanent magnet linear synchronous actuators (moving magnet) in Simscape
Hello Samuel, please start with this block: https://www.mathworks.com/help/physmod/sps/ref/pmlsm.html. You may consider using ...

5년 초과 전 | 0

| 수락됨

답변 있음
why there is a voltage drop across the secondary side of the transformer from other of the theoretical values in simulink?
Hello Teja, For the voltage, you are simulating a non-ideal transformer with losses so it makes sense that your voltage is drop...

5년 초과 전 | 0

| 수락됨

답변 있음
Voltage control in an islanded microgrid
Hello Bijit, there are numerous ways to address 5th and 7th harmonics. What strategy are you trying to use to solve the issue?...

5년 초과 전 | 0

| 수락됨

답변 있음
Is the star-delta starter example model correct?
Hello Phil, this is the equivalent of taking a wye load and changing it to a delta load, so line current is modified by a facto...

5년 초과 전 | 0

| 수락됨

답변 있음
How can i connect physical ports from one subsystem to another
Hello Matteo, you've already found the interface blocks that allow you to connect the two electrical simulation technologies. ...

5년 초과 전 | 0

| 수락됨

답변 있음
In the following simulink model solver configuration block is giving an error https://in.mathworks.com/matlabcentral/fileexchange/48747-smart-grid
Hello Jagrati, unfortunately, it seems this particular model is not being updated by it's owner, and there is not much we can d...

5년 초과 전 | 0

답변 있음
How to distinguish Simscape and Simulink lines in a program?
Hello Aseem, unfortunately, there is not an object parameter that easily distinguishes between the types of lines. However, yo...

5년 초과 전 | 0

| 수락됨

답변 있음
Why is the voltage of the PV array dropping?
Hello Leo, if you remove your inverter and connect the boost converter directly to an appropriately sized resistor, the system ...

5년 초과 전 | 0

| 수락됨

답변 있음
home energy management system ?
Hello, if you use specialized power systems, you can look under the mask to see how the models are implemented. You just need ...

5년 초과 전 | 0

답변 있음
Simscape FEM-parameterised PMSM error
Hello Tim, your id vector needs to look something like this [-40 -20 -10 0 10 20 40]. Your array is mostly symetric, but doesn...

5년 초과 전 | 0

| 수락됨

답변 있음
HERIC and H5 photovoltaic inverter topology-simulation
You can set Ts_Control to 5e-4;

5년 초과 전 | 0

답변 있음
Simscape resolver model variation
Hello Jonathan, a simple way to attempt to imlement this might be to inject a delay on the sensing side (to just one of the sig...

5년 초과 전 | 0

| 수락됨

답변 있음
FFT issues in Matlab 2019b version
Hello Debashish, You need to narrow it down to 1 of 2 possiblities. 1, the simulaiton is correct, but fft is providing the w...

5년 초과 전 | 0

답변 있음
1RC battery Parameter estimation
Hello Neelaish, do you have access to this example? https://www.mathworks.com/help/autoblks/ug/generate-parameter-data-for-esti...

5년 초과 전 | 0

답변 있음
Generating pulse width modulation gates
Hello Nate, You can use a repeating sequence to generate your carrier wave. It looks like that is what you are trying to do. ...

5년 초과 전 | 0

답변 있음
A question relating to block names in Simulink
Hello, the block name can be changed by clicking on the block once. This will make it's name visible. Then, move your mouse o...

5년 초과 전 | 1

| 수락됨

답변 있음
I have a whole power system model build in simulink. But when I try to converge it, it does not converge. Help needed. Please message if you think you can help
Hello Arkadeep, I would recommend starting with a much smaller network and getting that to work with load flow before attemptin...

거의 6년 전 | 0

| 수락됨

답변 있음
LiB Battery (Table-Based) Dynamics impedance error
Hello Alfred, it looks like the plot you are showing from simulink, is a standard scope plot, which means that it is a time bas...

거의 6년 전 | 0

답변 있음
Difference between Extended Kalman Filter and Augmented Extended Kalman Filter
Hello Sanya Gode, here is a document listing the difference between our unscented and extended kalman filters: https://www.math...

거의 6년 전 | 0

| 수락됨

답변 있음
how to stable the induction motor drive
Hello Piyush, could you please be more specific in what you would like? If you mean, how to choose the correct gain values f...

거의 6년 전 | 0

답변 있음
I meet with some problms when simulating tranmission line.
Hello Xiaobo, this is due to the particular transmission line settings. As it is lossless, and in a simscape network with no l...

거의 6년 전 | 0

| 수락됨

답변 있음
How do you combine multiple physical (Simscape) signals into a single one ?
Hello Jefazo, there is a simscape bus, but it only works for the standard bi-direction connections, and not physical signal wir...

거의 6년 전 | 0

| 수락됨

답변 있음
Mux/Demux for physical signals
Hello Christian, you are unfortunately correct in that you must create your own mux and demux blocks for simscape physical sign...

거의 6년 전 | 0

| 수락됨

답변 있음
Why are the results different between Simscape model and Simulink generated model ?
Hello Samuel, the first thing to check is to make sure the step size is the same between the two models. I am assuming it is, ...

거의 6년 전 | 0

| 수락됨

답변 있음
Adding simscape to already installed old version of matlab
Hello Anna, you can do this by running the 2019a installer again. It will default to assuming you want to add toolboxes to you...

거의 6년 전 | 0

| 수락됨

답변 있음
Modelling drone on simulink
Hello Alok, you can use simscape electrical to do this. This example has a BLDC with speed control implemented. You can easil...

거의 6년 전 | 0

| 수락됨

답변 있음
Second ambient temperature in battery model.
Hello Jakob, this second temperature gives you a second data point for specifying your battery parameters. This will allow the...

거의 6년 전 | 0

| 수락됨

답변 있음
Error loading Simulink with Simscape blocks
Hello Thilo, we've been seeing this error from a few people. The common recomendation is that it's an install issue. Please r...

거의 6년 전 | 0

| 수락됨

답변 있음
Error: Two blocks cannot be connected in series
Hello Susmita, this is a common problem in specialized power systems (was called simpowersystems a while ago). Essentially, in...

거의 6년 전 | 3

더 보기