답변 있음
how to run the matlab code step-by-step?
Use the debugger. See <http://www.mathworks.com/help/releases/R2011a/techdoc/matlab_env/f2-4931.html Editing and Debugging MATLA...

14년 초과 전 | 3

답변 있음
the use of the linear quadratic requlator method in the state space controller and observer design
The matrices R and Q are essentially design parameters or weights that you have to choose as part of the control system design, ...

14년 초과 전 | 0

| 수락됨

답변 있음
How can one get Block Choices for a Configurable Subsystem in an array by using Matlab Command?
get_param(gcb,'BlockChoice') will give you the current block choice for the block. get_param(gcb,'MemberBlocks') wi...

14년 초과 전 | 1

| 수락됨

답변 있음
Variable orifice
Yes, I see the same error in R2009b. The problem is with the pressure differential values, you only provide two values and the <...

14년 초과 전 | 0

답변 있음
How I can model the limit of the speed and acceleration using a Simulink block?
Presumably, you're feeding your valve block with a signal representing the opening of the valve. How is that signal generated? ...

14년 초과 전 | 1

답변 있음
Difference between Simulink Coder, Embedded Coder and Matlab Coder
MATLAB Coder is used to generate ANSI C/C++ code from MATLAB and is a pre-requisite for Simulink Coder and Embedded Coder. Simul...

14년 초과 전 | 10

답변 있음
Exporting NX (Unigraphics) models to SimMechanics
As you found out, NX is not supported out of the box. However, there is an <http://www.mathworks.com/help/releases/R2011a/toolbo...

14년 초과 전 | 0

| 수락됨

답변 있음
translational body spring damper system with friction
Hi, Looking at your model, I would make the following comments: * This is a numerically stiff system, so use a stiff solve...

14년 초과 전 | 1

| 수락됨

답변 있음
Problem to resolve algebraic loop
Put the transfer function between the voltage measurement block and the Simulink - PS Converter block, or between the PS - Simul...

14년 초과 전 | 1

답변 있음
Help in Solver error
It really isn't difficult, you need to start thinking... The following is pretty self-explanatory: <<https://lh6.googleuserco...

14년 초과 전 | 2

답변 있음
Simulink Coder(RTW) can be purchased separately without having entire Matlab software?
For Simulink Coder, you need MATLAB, MATLAB Coder and Simulink (unless you already have those, in which case you can add Simulin...

14년 초과 전 | 0

답변 있음
matlab 2011
Ask the IT department of your university what's the best way for you to access MATLAB, they may have some licenses available for...

14년 초과 전 | 0

답변 있음
Varying parameters During a simulation
Also have a look at <http://www.mathworks.com/matlabcentral/fileexchange/24294-simulink-signal-viewing-using-event-listeners-and...

14년 초과 전 | 1

| 수락됨

답변 있음
Sampletime/rate from mask Initialization
Have you tried: get_param(gcb,'CompiledSampleTime') HTH, Arnaud

14년 초과 전 | 0

14년 초과 전 | 0

| 수락됨

답변 있음
Plotting 3D graph using measured points
Maybe try <http://www.mathworks.com/help/releases/R2011a/techdoc/ref/plot3.html |plot3|>. Arnaud

14년 초과 전 | 1

| 수락됨

답변 있음
Where can I find information on CCS IDE versions that can be supported with Embedded Coder?
<http://www.mathworks.co.uk/products/embedded-coder/ti-adaptor.html> HTH, Arnaud

14년 초과 전 | 0

| 수락됨

답변 있음
TLC file syntax help?
Have you read the documentation on <http://www.mathworks.com/help/releases/R2011a/toolbox/rtw/tlc/bp6j4co.html Target Language C...

14년 초과 전 | 1

| 수락됨

답변 있음
Photovoltaic MPPT fuzzy logic in Matlab/Simulink
If your signal is discrete, you can use the <http://www.mathworks.com/help/releases/R2011a/toolbox/simulink/slref/difference.htm...

14년 초과 전 | 0

| 수락됨

답변 있음
sample time mismatch
One of your busses has a continuous sample time, while the other one a discrete sample time of 1s. Use a <http://www.mathworks.c...

14년 초과 전 | 2

답변 있음
Transfer data wireless
You can maybe use the <http://www.mathworks.com/help/releases/R2011a/toolbox/instrument/tcpipsend.html TCP/IP Send> and <http://...

14년 초과 전 | 1

답변 있음
How do I run a simulation with a transfer function block and a multi dimensional input ?
The transfer function block only supports scalar input signals, hence the error, see the <http://www.mathworks.com/help/releases...

14년 초과 전 | 0

답변 있음
Simulink Design Optimisation
If you want to inject your measured input data in the model, use one or more root-level <http://www.mathworks.com/help/releases/...

14년 초과 전 | 0

답변 있음
Doubt in SOC of battery
The SOC is calculated as follows (see <http://www.mathworks.com/help/releases/R2011a/toolbox/physmod/powersys/ref/battery.html B...

14년 초과 전 | 0

답변 있음
Help in my model
What is the value of your resistance and what's the amplitude of your current source? I suspect current's still flowing through ...

14년 초과 전 | 0

| 수락됨

답변 있음
How to generate .m file from SIMULINK model (.mdl file)?
As Andreas suggested, use the <http://www.mathworks.com/help/releases/R2011a/toolbox/simulink/slref/sim.html |sim|> command to r...

14년 초과 전 | 1

답변 있음
Help to understand generic battery model
I think the second one is correct. The first one would be correct too if the - port was grounded (which it isn't). HTH, Ar...

14년 초과 전 | 0

| 수락됨

답변 있음
Doubt in Ideal Switch
Are you referring to the <http://www.mathworks.com/help/releases/R2011a/toolbox/physmod/powersys/ref/idealswitch.html Ideal Swit...

14년 초과 전 | 1

답변 있음
Problem with connection
Just use a <http://www.mathworks.com/help/releases/R2011a/toolbox/physmod/powersys/ref/seriesrlcbranch.html Series RLC Branch> i...

14년 초과 전 | 3

답변 있음
Connecting to xPC Target machine takes too long time
I would suggest <http://www.mathworks.co.uk/support/service_requests/contact_support.do contacting technical support>. HTH, ...

14년 초과 전 | 0