답변 있음
Does hyperbolic-solver really use a nonlinear solver?!
Sorry about that! Apparently this GUI is too sophisticated for me ;-) I think I got it this time. Bill

거의 12년 전 | 0

답변 있음
Does hyperbolic-solver really use a nonlinear solver?!
Hi, I think that referring to gradient components in the form e.g. ux(1,:) is fine. But entering complicated nonlinear coeffi...

거의 12년 전 | 0

답변 있음
Does hyperbolic-solver really use a nonlinear solver?!
Oh, sorry, I thought you were using the documented hyperbolic function. I'm afraid I have no idea why your code isn't doing wha...

거의 12년 전 | 0

답변 있음
Does hyperbolic-solver really use a nonlinear solver?!
The first thing to check is that your version of MATLAB is R2012b or newer. The nonlinear hyperbolic (and parabolic) solvers hav...

거의 12년 전 | 0

답변 있음
Scalar PDE Coefficients in Function Form for the 'parabolic' pde solver
OK, so N is a very large number? parabolic calculates a single time-dependent solution from a single initial solution vector....

거의 12년 전 | 0

답변 있음
Scalar PDE Coefficients in Function Form for the 'parabolic' pde solver
Sorry, I'm not understanding your question. If you want to compute K (or M or F) for a specific u-vector, you can call assema...

거의 12년 전 | 0

답변 있음
Solving an elliptic PDE with a point source
Hi, As you've probably observed, PDE Toolbox doesn't support the du/dx term explicitly. However there is a trick you can try ...

거의 12년 전 | 0

답변 있음
How to generate regular mesh in pde toolbox? (in a mutiple subdomain geometry)
I guess the first question is, what is the reason for the four subdomains? If the objective is simply to have different properti...

대략 12년 전 | 0

| 수락됨

답변 있음
Why use triangular mesh when solving poisson equation in pde toolbox?
Hi, Because your domain is rectangular, you can use the poimesh function to generate a "regular" triangular mesh on that doma...

대략 12년 전 | 0

| 수락됨

답변 있음
nonlinear heat transfer in a thin plate - error help
This example works only in R2012b (or newer) versions of MATLAB. If you are using one of these versions, please post the full e...

대략 12년 전 | 0

답변 있음
How can I enter a source term which is a vector, to solve -div(cgradu)=F(F a vector)?
Yes, your pdebound function is incorrect for a system of PDE (N>1). Specifically, as this documentation page shows, http://w...

대략 12년 전 | 0

답변 있음
How can I enter a source term which is a vector, to solve -div(cgradu)=F(F a vector)?
I assume N is > 1? How did you define the first argument to assempde, b? I'm guessing that the problem at line 245 of assempde...

대략 12년 전 | 0

답변 있음
Solving a system of PDE, not on the same control volume
Your pdefun function should look something like this: function [c,f,s] = pdefun(x,t,u,DuDx) if(x < L) k = a...

대략 12년 전 | 0

| 수락됨

답변 있음
Definition of the c coefficient for assempde
>Do you recommend to keep trying to resolve it with this pde tool? Yes, definitely. I'm almost certain that the 10-entry versio...

대략 12년 전 | 0

답변 있음
Solving a system of PDE, not on the same control volume
Hi, There is no difficulty using pdepe to solve your equation. You define xmesh over the full 2L length and, for best result...

대략 12년 전 | 0

답변 있음
Definition of the c coefficient for assempde
Hi, Your coefficients are sufficiently complicated that I'm not sure I understand all the issues, but hopefully I can at leas...

대략 12년 전 | 0

답변 있음
Definition of the c coefficient for assempde
Hi, Yes, you can solve your problem with PDE Toolbox. I recommend writing a MATLAB function to define your c-coefficient a...

대략 12년 전 | 0

| 수락됨

답변 있음
pdepe: Unable to meet integration tolerances without reducing the step size below the smallest value allowed
Hi, pdepe is designed for PDEs where the diffusion term is relatively large compared with the convection term. In your equat...

대략 12년 전 | 0

| 수락됨

답변 있음
How is pdepe solving?
At the very bottom of the www page you show above is this reference: 1] Skeel, R. D. and M. Berzins, "A Method for the Spatia...

대략 12년 전 | 0

| 수락됨

답변 있음
Why is the PDE Toolbox solving my parabolic equation incorrectly?
Hi, I have looked further into this issue of a divergent solution when n is positive but less than 2*pi^2. Not surprising...

대략 12년 전 | 0

답변 있음
Why is the PDE Toolbox solving my parabolic equation incorrectly?
Hi, I have already replied to your post in the MATLAB newsgroup but I guess you didn't see it. I've included the same inform...

대략 12년 전 | 0

| 수락됨

답변 있음
How to solve a non-standard PDE using MATLAB pde-toolbox?
For a single dependent variable like you have, the c-coefficient can be a 2x2 matrix. That is explained on this documentation pa...

대략 12년 전 | 0

| 수락됨

답변 있음
Solving PDEs: Number of rows required in output of user defined coefficient functions
Hi Susannah, I think I can give you some help on this. I'll discuss the c-coefficient since that is the most complex one. ...

대략 12년 전 | 0

| 수락됨

답변 있음
What are the meaning of row 6 and 7 in the decomposed geometry matrix in matlab R2013b?
Hi, There were no changes to the decomposed geometry matrix in PDE Toolbox for the R2013b release. This documentation page is...

대략 12년 전 | 0

답변 있음
Strange behaviour of pde-toolbox in labeling or a bug?
Hi, The way I have dealt with the problem of defining coefficient matrices when I have had geometries similar to yours is to ...

12년 초과 전 | 0

답변 있음
Strange behaviour of pde-toolbox in labeling or a bug?
Hi, Your geometry is unusual in that none of the rectangles intersect each other. The algorithm in function decsg is designe...

12년 초과 전 | 1

| 수락됨

답변 있음
How can I solve simultaneous PDEs using pdepe?
By "two pdes that are interlinked" do you mean that you have two PDE and two dependent variables, say, u1 and u2? If so, pde...

12년 초과 전 | 2

답변 있음
How to solve 2-D steady state heat conduction problem in MATLAB ?
MATLAB function pdepe can solve PDE in only *one* spatial dimension and time. The PDE Toolbox can solve PDE in two spatial di...

12년 초과 전 | 0

답변 있음
explanation on boundary condition matrix
Have you looked at this page? <http://www.mathworks.com/help/pde/ug/assemb.html> There is a general description of the mat...

12년 초과 전 | 0

| 수락됨

답변 있음
get solution in spesific point in the domain after solving pde
There are several ways to do this. Here is one simple one: % p is the point matrix from initmesh % u is the solution f...

12년 초과 전 | 0

| 수락됨