답변 있음
Generate mex file for filter
Unfortunately, it doesn't look like you can generate code from this class. Perhaps you can separate out the call to the filter i...

대략 13년 전 | 0

| 수락됨

답변 있음
Code generation of TCP/IP block
The TCP/IP block is probably not supported for code-generation, which is why you don't see it in the generated code (do you see ...

대략 13년 전 | 1

| 수락됨

답변 있음
empty signal coming into minimum block problem
Not sure if this is what you're looking for, but you can use the <http://www.mathworks.com/help/simulink/slref/stopsimulation.ht...

대략 13년 전 | 0

답변 있음
Insert a detector block in simulink
Try this instead: hDetector=add_block('sldvlib/Temporal Operators/Detector',[blockName 'Detector']) You can right click ...

대략 13년 전 | 0

| 수락됨

답변 있음
Set ports properties from Level2-M-File
Yes, you do have to specify the output port sampling modes as well. Also, your |setInPortSamMode| doesn't have the correct proto...

대략 13년 전 | 0

답변 있음
I need PLC code generator in simulink but does not aprear in my pop menu. how can I install it?
If you need to buy a license to Simulink PLC Coder, you can either call <http://www.mathworks.com/support/contact_us/index.html ...

대략 13년 전 | 0

답변 있음
Error in MATLAB function
Your MATLAB Function block's <http://www.mathworks.com/help/simulink/ug/matlab-function-block-editor.html#bqgwvsq-1 Ports and Da...

대략 13년 전 | 0

답변 있음
MATLAB command line control of Simulink signal builder
Please see this <http://www.mathworks.com/matlabcentral/answers/49996 previously answered question>.

대략 13년 전 | 0

답변 있음
errors of HDL Coder geneation in tutorial
The "cmd.exe is not recognized as an internal or external command, operable program or batch file" error usually means that you ...

대략 13년 전 | 0

답변 있음
Is there a tutorial for exporting a Simulink Model to C++ for running in an external real time simulation?
Here is the relevant documentation: <http://www.mathworks.com/help/rtw/hardware-in-the-loop-hil-simulation.html Deploy environme...

대략 13년 전 | 0

답변 있음
Problem in Find Simulink Block
You can use a <http://www.mathworks.com/help/simulink/ug/triggered-subsystems.html Triggered Subsystem> to do this.

대략 13년 전 | 1

답변 있음
open another software using MATLAB
If the software has a COM interface, you can use the <http://www.mathworks.com/help/matlab/using-com-objects-in-matlab.html MATL...

대략 13년 전 | 0

답변 있음
simulink support for Arduino evaluation
You should be able to use blocks from the <http://www.mathworks.com/help/simulink/logic-and-bit-operations.html Logic and Bit Op...

대략 13년 전 | 0

답변 있음
how to integrate matlab code with fpga kit
You can use <http://www.mathworks.com/products/hdl-coder/index.html HDL Coder> to generate HDL code from your MATLAB functions. ...

대략 13년 전 | 0

답변 있음
Simulink: How to start simulation of a subsystem separately?
If your subsystem is inside an <http://www.mathworks.com/help/simulink/ug/enabled-subsystems.html enabled subsystem>, you simply...

대략 13년 전 | 0

답변 있음
CMEX S-function callback methods
You can use <http://www.mathworks.com/help/simulink/sfg/mdlsimstatuschange.html mdlSimStatusChange> (with the condition: |simSta...

대략 13년 전 | 0

| 수락됨

답변 있음
Compiling C++ s-functions in MATLAB R2007b x86 on Windows 7 x64 Professional
The 'Specified module could not be found' error usually means that you are missing one or more DLL dependencies. Please see if t...

대략 13년 전 | 0

| 수락됨

답변 있음
How to control no. of simulations/iterations of embedded MATLAB program in Simulink model
Please read the section <http://www.mathworks.com/help/simulink/ug/choosing-a-solver.html Choose a Solver> to understand the dif...

대략 13년 전 | 0

답변 있음
Getting the datatype of a signal from simulink
Please see <http://www.mathworks.com/matlabcentral/answers/8679#answer_11953 this answer>.

대략 13년 전 | 2

답변 있음
Communication between MATLAB R2010a and CCS 3.3
I think what you need is <http://www.mathworks.com/help/ecoder/ug/processor-in-the-loop-pil-simulation.html PIL Simulation>. You...

대략 13년 전 | 0

답변 있음
Block Creation in Simulink
Please read the section on <http://www.mathworks.com/help/simulink/custom-block-basics.html Custom Block Basics> to get started....

대략 13년 전 | 0

답변 있음
Compiled S-Function Not Found Error
What does MATLAB return when you type "mexext" at the prompt? If it returns mexa64, then you need to compile your MEX-function a...

대략 13년 전 | 0

답변 있음
How to connect Phantom (Robot) to windows real-time target?
From <http://www.mathworks.com/help/rtwin/ug/using-i-o-boards.html this page>: "The device drivers supported by the Real-Time...

대략 13년 전 | 1

| 수락됨

답변 있음
MATLAB compiling problem/error
I'm not sure if I can be of much help, but just some thoughts that might help you understand what might be going on: # It is ...

대략 13년 전 | 0

답변 있음
create Executable file from simulink model
I think you might need to modify the generated code to accept the input from whatever source you need it to use.

대략 13년 전 | 1

답변 있음
how to define x-vectorm in M S-Function
You are required to return your computed states (the vector x) in Case 2 (mdlUpdate). Please read <http://www.mathworks.com/help...

대략 13년 전 | 0

답변 있음
How can I access the value of signals at the time of stopping the simulation.
Perhaps you can use the model callback <http://www.mathworks.com/help/simulink/ug/using-callback-functions.html#f4-56417 StopFcn...

대략 13년 전 | 0

답변 있음
Generate a variable sine wave during simulink simulation
The Sine Wave block from the Simulink>Sources library does not accept any inputs, so you cannot use this block to change 'M' and...

대략 13년 전 | 0

| 수락됨

답변 있음
can i install Matlab runtime (MCR) on android tab?
The MATLAB Compiler Runtime (MCR) has the same System requirements as MATLAB. See <http://www.mathworks.com/support/sysreq/previ...

대략 13년 전 | 0

| 수락됨

답변 있음
is Simulink can contact with FPGA kit ?
Yes, you can generate HDL code from Simulink models using <http://www.mathworks.com/products/hdl-coder/index.html HDL Coder>. Pl...

대략 13년 전 | 0

| 수락됨