Create Model Using Simulink Templates
Vision HDL Toolbox™ Support Package for Xilinx® Zynq®-Based Hardware provides Simulink® model templates for working with an HDMI camera card. The templates provide a starting point to:
Design frame-based algorithms to run in Simulink.
Design pixel-streaming algorithms targeted to the FPGA
Design frame-based algorithms targeted to the ARM® processor.
Design combination hardware and software algorithms that use the FPGA and the ARM processor.
Design pixel-streaming algorithms targeted to the FPGA that use a frame buffer or AXI manager interface.
The templates use the Video Capture block and are meant for use with an HDMI FMC card. If you are using a MIPI® FMC card, you can replace the Video Capture block in some templates with the Video Capture MIPI block. To choose a template for use with a MIPI FMC card, consider these limitations.
The MIPI card reference design supports only RGB format.
For pixel-streaming design with MIPI, you must replace the blocks in the Conversion area with RGB Vector to Packed RGB and Packed RGB to RGB Vector blocks. You can copy these blocks from the Corner Detection with Zynq-Based Hardware and MIPI Sensor example.
The MIPI reference design supports a random access external memory interface but does not support a frame buffer external memory interface.
The templates show how to capture video from the hardware and convert video data to the required interfaces for the respective algorithm designs.
Click the Simulink button, , or type
simulinkat the MATLAB® command prompt. If you already have Simulink open, click the arrow next to the New Model button, and select Model....
On the Simulink start page, expand the Vision HDL Toolbox Support Package for Xilinx Zynq-Based Hardware section, and click the model template you want to open.
You can also create a model from one of these templates from the command line. For example:
new_system myVZmodel FromTemplate visionzynq_behavioral_Yonly.sltx open_system myVZmodel
|Frame-Based Design for Simulink|
|Pixel-Streaming Design for FPGA|
|Pixel-Streaming Design with Frame Buffer|
|Pixel-Streaming Design with External Memory|
|Frame-Based Design for ARM Processor|
A new model, with the template contents and settings, opens in the Simulink Editor. Save the model.