Model Configuration Parameters for BeagleBone Black Hardware Board

Hardware Implementation Pane Overview

1. In the Simulink^® Editor, select Simulation > Model Configuration Parameters.

2. In the Configuration Parameter dialog box, click Hardware Implementation.

3. Set the Hardware board parameter to BeagleBone Black.

4. The parameter values under Hardware board settings are automatically populated to their default values.

   You can optionally adjust these parameters for your particular use case.

5. Click Apply to apply the changes.

For more information on selecting a hardware support package and general configuration settings, see Hardware Implementation Pane.

Operating system options

Parameter	Description	Default Value
Base Rate Task Priority	Sets the static priority of the base rate task in the operating system.	40

Board Parameters

Parameter	Description	Default Value
Device Address	Set the IP address of the hardware board on your network.	192.168.7.2
Username	Set the root username of the Linux operating system on the hardware board.	root
Password	Set the root password of the Linux operating system password on the hardware board.	empty

Build options

Parameter	Description	Default Value
Build action	Defines how Simulink Coder™ responds when you build your model.	Build, load, and run

Clocking

Parameter	Description	Default Value
CPU Clock Frequency	The CPU clock frequency in MHz.	1000

External Mode

Parameter	Description	Default Value
Communication interface	Transport layer used to exchange data between the development computer and hardware.	TCP/IP
Run external mode in a background thread	Force the external mode engine in the generated code to execute in a background task.	disabled
Port	Port number on the hardware board.	17725
Verbose	Enable view of the external mode execution progress and updates in the Diagnostic Viewer.	disabled