Main Content

Ethernet Receive

Receive Ethernet packets from Simulink Real-Time target computer

  • Library:
  • Simulink Real-Time / IP / Ethernet

  • Ethernet Receive block

Description

The Ethernet Receive block enables you to receive Ethernet packets on a Simulink® Real-Time™ target computer. The block receives the packet from the Ethernet interface (device) that you select on the target computer.

Ports

Output

expand all

Connect the Ethernet packet signal from this port to the model. If you enable the Enable Simulink messages parameter, the data type is Ethernet_Packet. This data type consists of:

  • Data: DataType: uint8, Complexity: real, Dimensions: [64 1]

  • Length: DataType: uint8, Complexity: real, Dimensions: 1

Data Types: uint8 | Ethernet_Packet

This port is available when you disable the Enable Simulink messages parameter. The Length is the number of bytes in the new packet received, otherwise it is 0.

Data Types: double

Parameters

expand all

The Interface Name is the name of the target computer Ethernet interface. Use the Speedgoat Ethernet Configuration Tool to identify the Ethernet index (interface) on the target computer.

Programmatic Use

Block Parameter: InterfaceName

The Data Width is the width of the Data port in bytes. Ethernet packets that are shorter than this width are padded with zeros.

Programmatic Use

Block Parameter: DataWidth

The Enable Simulink messages directs the block to treat data as messages. When enabled, the Length port is removed.

Programmatic Use

Block Parameter: MessageOut

The Maximum messages in a time step selects the maximum number of packets that the block outputs for each time step.

Programmatic Use

Block Parameter: MaxMessagesPerStep

The Capture filter selects which packets to receive. If no filter is provided, all packets are received. For information about capture filter syntax, see the Expressions section in the tcpdump page in the QNX Neutrino documentation. This example filter captures packets that are addressed to destination port 9001.

dst port 9001

Programmatic Use

Block Parameter: FilterString

Enter the base sample time or a multiple of the base sample time. -1 means that sample time is inherited.

Programmatic Use

Block Parameter: SampleTime

Extended Capabilities

C/C++ Code Generation
Generate C and C++ code using Simulink® Coder™.

Version History

Introduced in R2022a