LPS25h Pressure Sensor

Measure barometric air pressure and ambient temperature

• 

Libraries:
Raspberry Pi Blockset / Sense HAT

Description

Measure barometric air pressure and ambient temperature using the Pressure sensor on board Raspberry Pi^® SenseHAT.

Note

To generate code C/C++ code for this block, you must have an Embedded Coder^® license.

Ports

Output

Pressure — Barometric air pressure output port

scalar

The barometric air pressure measured in hectoPascal (hPa) from the Pressure sensor.

Data Types: double

Temp — Ambient temperature output port

scalar

The ambient temperature output measured in degree Celsius (C) from the Pressure sensor.

Data Types: double

Parameters

Board — Raspberry Pi hardware board

Pi 2 Model B (default) | Model B Rev1 | Model B Rev2 | Model B+ | Pi 3 Model B | Pi 3 Model B+ | Pi Zero W | Pi 4 Model B | Pi Zero 2 W | Compute Module 4 | Pi 5 Model

Select your Raspberry Pi hardware board. You can find this information on the target hardware, product packaging, or product documentation.

Sensor output data rate (ODR) — Rate at which the sensor measures data

12.5 Hz (default) | 1 Hz | 7 Hz

The rate at which the Pressure sensor measures barometric air pressure and the ambient temperature.

Sample time — Frequency at which data is measured data is read from Pressure sensor

0.1 (default) | scalar

Specify how often this block reads the measured data from the Pressure sensor.

Extended Capabilities

C/C++ Code Generation

Generate C and C++ code using Simulink® Coder™.

To generate code C/C++ code for this block, you must have an Embedded Coder license. For more information on selecting the right product stack according to your development goals, see Product Stack for Raspberry Pi Blockset.

Version History

Introduced in R2017a