Terminate Teensy Loader application post deployment

Option to close the Arduino Teensy Loader application after you deploy a Simulink model

Since R2024a

Model Configuration Pane: Hardware Implementation / Hardware board settings / Target hardware resources / Build options

Description

Select this option to close the Arduino^® Teensy Loader application after you deploy a Simulink^® model on your Arduino Teensy 4.0 or 4.1 hardware board.

Tip

To avoid any latency while re-deploying a Simulink model on your Arduino Teensy hardware board, clear this option.

Warning

If the Teensy Loader application does not detect the COM port that you either manually specify or select in Configuration Parameters > Target hardware resources > Host-board connection > Application download, the application then automatically detects the COM port to which your Arduino Teensy board is connected to the host computer and deploys the Simulink model.

Dependencies

To enable this parameter, set Hardware board to either Teensy 4.0 (Arduino Compatible) or Teensy 4.1 (Arduino Compatible).

Settings

off | on

Default: off

Programmatic Use

No programmatic use is available.

Version History

Introduced in R2024a