Main Content

이 페이지는 기계 번역을 사용하여 번역되었습니다. 영어 원문을 보려면 여기를 클릭하십시오.

타깃 하드웨어에서 실행

타깃 하드웨어에서 모델 실행

Simulink® 모델을 빌드하여 Raspberry Pi® 하드웨어에서 실시간으로 실행합니다. 외부 모델에서 신호 모니터링 및 파라미터 조정을 사용하여 Simulink 모델과 상호 작용합니다.

Raspberry Pi Resource Monitor 앱Monitor and manage Raspberry Pi resources (R2020b 이후)

도움말 항목

예제 및 방법

Communicate with Raspberry Pi Hardware

This example shows how to tune the parameters and monitor the signals of an algorithm running on Raspberry Pi® board.

Communicate with Hardware Using Connected IO

Get peripheral data from the hardware before deploying the Simulink model on the hardware.

Tune and Monitor Model Running on Hardware

Use your host computer to monitor and control an application running on the target hardware.

Run Simulink Model on Raspberry Pi Hardware

Run a Simulink model on Raspberry Pi hardware.

Automatically Run Simulink Model on Raspberry Pi After Restart

Automatically start a Simulink model deployed on Raspberry Pi hardware every time you restart the hardware.

Stop or Restart a Model Running on Raspberry Pi Hardware

Stop or restart a model running on Raspberry Pi hardware.

Configure and Calibrate Pan Tilt Hardware Using Raspberry Pi Pan Tilt HAT

This example shows how to configure and calibrate the pan and tilt hardware using the Pan Tilt HAT block from Simulink® Support Package for Raspberry Pi® Hardware.

Configure Image and Device Properties of Raspberry Pi V4L2 Video Capture Block to Detect Objects

This example shows how to configure the image and device properties of the V4L2 Video Capture block from Simulink® Support Package for Raspberry Pi® Hardware and observe the output in the SDL Video Display block.

Publish MQTT Messages and Subscribe to Message Topics

Basics of the MQTT messaging protocol.

로봇 운영 체제 사용하기

Install ROS Melodic on Raspberry Pi

Use the instructions to install ROS melodic on your Raspberry Pi hardware board.

Start and Stop ROS Master on Raspberry Pi

Use the instructions to start and stop a ROS master on Raspberry Pi hardware board.

워크플로 예제

Implement Connected I/O to Communicate with External Peripheral Devices Using Raspberry Pi

This example shows how to implement connected I/O in Normal mode of simulation using Raspberry Pi® hardware.

Publish or Retrieve Data to Internet of Things Using ThingSpeak

Publish Data to Internet of Things using ThingSpeak.

Log Humidity and Temperature Values to Database and Calculate Dew Point Using External C Code Integration Workflow

This example shows how to use Simulink® Support Package for Raspberry Pi® Hardware to integrate a user-defined C function with a Simulink model and achieve the following:

Implement Multicore Programming with CPU Core Affinity for Raspberry Pi

This example shows how to use explicit partitioning for Simulink® Support Package for Raspberry Pi® Hardware models to create atomic subsystems and concurrently execute tasks on a multicore Raspberry Pi processor.