Configure Coils
Configure the starting address and the number of coil registers
Since R2024b
Model Configuration Pane: Hardware Implementation / Simulink or Embedded Coder Hardware Support Package / Hardware board settings / Target hardware resources / Modbus
Description
Select the Configure Coils parameter to configure the starting address and the number of coil registers.
Dependencies
To enable this parameter, set Mode to server.
Coil Register Parameters
| Parameter | Description | Default Value |
|---|---|---|
Start address | Starting address of the coil register Dependencies: To enable this parameter, select Configure Coils. | 0 |
| Quantity | Number of coil registers Dependencies: To enable this parameter, select Configure Coils. | 1 |
Settings
on (default) |
offSelect this parameter to configure the starting address and the number of coil registers.
Recommended Settings
No recommendation.
Programmatic Use
| No programmatic use is available. |
Version History
Introduced in R2024b
