Generate report of steady state variables, initial states, and machine load flow for model
power_report('sys') opens the Generate Report Tool dialog box, which lets
you generate a report of steady state variables, initial states, and machine load flow
for a model. This tool can also be activated from the Powergui block dialog box by
selecting Generate Report.
In the check boxes, select any combination of measurements to include in the generated report, Steady state, Initial states, and Machine load flow. The default is unselected for all three.
Select the frequency or frequencies to include in the generated
60 Hz or
All. The default
Set the Units parameter to
Peak values to
display the peak values of the selected values.
Set the Units
RMS to display the
root-mean-square (RMS) values of the selected
In the pull-down menu, choose the format in which you want your
measurements displayed. The
floating point option
is displayed in mantissa-exponent form with five significant figures.
best of option is displayed with four significant
figures and uses mantissa-exponent form only for numbers larger than
9999. The final option is displayed in plain numbers with two figures
to the right of the decimal point. The default is
Generates a netlist stored in a file,
The file contains the node numbers automatically generated by
as well as parameter values of all linear elements. See the formats
described in the
Lets you edit the report.
Generate a report and save it to a file.