Linear calibration factor word#

Linear calibration factor word

Model Configuration Pane: Hardware Implementation / Simulink or Embedded Coder Hardware Support Package / Hardware board settings / Target hardware resources / ADC1, ADC2 and ADC3

Description

Specify the linear calibration factor word.

This parameter is available only if Calibration method is set to Specify calibration register manually and Calibration mode is set to either Linearity or both Offset and Linearity.

This parameter is available only for STM32H7xx based boards

Settings

Specify calibration register manually | Linearity

Specify the linear calibration factor word.

This parameter is available only if Calibration method is set to Specify calibration register manually and Calibration mode is set to either Linearity or both Offset and Linearity.

This parameter is available only for STM32H7xx based boards

Recommended Settings

No recommendation.

Programmatic Use

No programmatic use is available.

Version History

Introduced in R2014b