설치 및 설정

지원 패키지 설치, 펌웨어 업데이트 및 하드웨어 연결 구성

Communications Toolbox™ Support Package for USRP™ Radio를 사용하기 전에 다음을 수행해야 합니다.

Install Communications Toolbox Support Package for USRP Radio의 지침에 따라 이 지원 패키지를 설치합니다.
호스트 컴퓨터와 USRP 라디오 간의 통신을 설정합니다. Guided USRP Radio Support Package Hardware Setup 또는 Manual USRP Radio Support Package Hardware Setup 항목을 참조하십시오.

함수

`sdruload`	Load FPGA and firmware images for USRP radio
`findsdru`	Status of USRP radios connected to host computer

Install Communications Toolbox Support Package for USRP Radio
Install the Communications Toolbox Support Package for USRP Radio.
Guided USRP Radio Support Package Hardware Setup
Step through the installer setup of the connection between your host computer and radio.
Manual USRP Radio Support Package Hardware Setup
Steps to manually configure the connection between your host computer and radio.
USRP Radio Firmware Update
Updating the USRP Radio Firmware.
Uninstall Support Packages
Use Add-On Manager to uninstall the support package.
What to Do After Installation
Area to explore and experiment after installation of the Communications Toolbox Support Package for USRP Radio.
Supported Hardware and Required Software
Hardware and software required when using the Communications Toolbox Support Package for USRP Radio.

Describes the most common errors encountered with Communications Toolbox Support Package for USRP Radio and how to fix them.