제출됨
Electric Aircraft (VTOL) Battery Pack Model with Simscape™
Model a vertical takeoff and landing (VTOL) aircraft and explore battery pack design using simulation.
27일 전 | 다운로드 수: 12 |
제출됨
Dual Clutch Transmission Model in Simulink
Dual-clutch transmission with MATLAB scripts for optimizing the shift schedule.
27일 전 | 다운로드 수: 14 |
제출됨
Battery Electric Vehicle with Motor Cooling in Simscape
Battery electric vehicle with liquid-cooled motor.
27일 전 | 다운로드 수: 32 |
제출됨
Battery Pack Design Solution for Battery EVs in Simscape
Battery pack model for thermal management tasks, with modules of cells in series and parallel.
27일 전 | 다운로드 수: 20 |
제출됨
Backhoe Model in Simscape
Backhoe model, including hydraulic actuators for arm and bucket tilt, and multibody dynamics.
27일 전 | 다운로드 수: 17 |
제출됨
Aircraft Power Network in Simscape Electrical
Aircraft Power Network in Simscape Electrical with AC and DC networks
27일 전 | 다운로드 수: 14 |
제출됨
Aileron Model in Simscape
Actuator with ideal, hydraulic, and electrical designs.
27일 전 | 다운로드 수: 9 |
제출됨
Tracked Vehicle Model with Simscape™
Model a tracked vehicle driving on uneven surfaces. Model track segments or abstract model with multiple rollers per track.
3개월 전 | 다운로드 수: 27 |
제출됨
Wheel Loader Design with Simscape
Design a wheel loader with Simscape, including sizing CVT components, driving on uneven terrain, and lifting different implement...
3개월 전 | 다운로드 수: 23 |
답변 있음
Simscape Torque Sensor output is zero
Your angular motion sensor should be connected between shaft and a Mechanical Rotational Reference (NOT in series). Your torque...
Simscape Torque Sensor output is zero
Your angular motion sensor should be connected between shaft and a Mechanical Rotational Reference (NOT in series). Your torque...
7개월 전 | 1
| 수락됨
답변 있음
Does anyone know why I get an error when I run the fuel cell model for about 18000s?
The error message you encountered is because the test conditions for the fuel cell are not suitable for 18000 seconds. The driv...
Does anyone know why I get an error when I run the fuel cell model for about 18000s?
The error message you encountered is because the test conditions for the fuel cell are not suitable for 18000 seconds. The driv...
9개월 전 | 1
제출됨
Vehicle Model with Delft-Tyre in Simscape Multibody
Vehicle model in Simscape Multibody using 3-D tire model.
9개월 전 | 다운로드 수: 14 |
답변 있음
How to avoid adding the striking mass to the robot body mass during a collision test in simscape?
A really good way to do this is to use Simscape Multibody. With Simscape Multibody you can model contact forces between differe...
How to avoid adding the striking mass to the robot body mass during a collision test in simscape?
A really good way to do this is to use Simscape Multibody. With Simscape Multibody you can model contact forces between differe...
10개월 전 | 0
답변 있음
Battery box in Simscape
Hi Bence, You can model a housing for your battery modules that prevents heat transfer between the modules. This could be pass...
Battery box in Simscape
Hi Bence, You can model a housing for your battery modules that prevents heat transfer between the modules. This could be pass...
10개월 전 | 0
| 수락됨
답변 있음
Add a Simscape Multibody model to a Simscape Electrical model
Hi all, In R2021a we added interface blocks to more easily connect Simscape Multibody joints to 1D mechanical Simscape networks...
Add a Simscape Multibody model to a Simscape Electrical model
Hi all, In R2021a we added interface blocks to more easily connect Simscape Multibody joints to 1D mechanical Simscape networks...
11개월 전 | 1
답변 있음
Workflow to combine CAD Model and SIMSCAPE Thermal transient Analysis
You should be able to obtain distance measurements using sensors, assign them to a Simulink signal (or Simscape Physical Signal)...
Workflow to combine CAD Model and SIMSCAPE Thermal transient Analysis
You should be able to obtain distance measurements using sensors, assign them to a Simulink signal (or Simscape Physical Signal)...
12개월 전 | 0
답변 있음
Mechanical rotational port of Induction Motor from the specialized power system library
I believe you need to remove the Mechanical Rotational Reference. You have essentially welded the shaft to the earth so it cann...
Mechanical rotational port of Induction Motor from the specialized power system library
I believe you need to remove the Mechanical Rotational Reference. You have essentially welded the shaft to the earth so it cann...
대략 1년 전 | 0
답변 있음
simscape (planetary gear)
The planetary gear enforces a kinematic relationship between the input and output shafts. The torque levels, however, will depe...
simscape (planetary gear)
The planetary gear enforces a kinematic relationship between the input and output shafts. The torque levels, however, will depe...
대략 1년 전 | 1
| 수락됨
답변 있음
Friction and wear Simulink model for brake pad application
Take a look at the Simscape Driveline Disc Brake block https://www.mathworks.com/help/sdl/ref/discbrake.html This example ...
Friction and wear Simulink model for brake pad application
Take a look at the Simscape Driveline Disc Brake block https://www.mathworks.com/help/sdl/ref/discbrake.html This example ...
대략 1년 전 | 0
답변 있음
Testing of disc brakes
The parameters you describe match well with the Simscape Driveline Disc Brake block https://www.mathworks.com/help/sdl/ref/...
Testing of disc brakes
The parameters you describe match well with the Simscape Driveline Disc Brake block https://www.mathworks.com/help/sdl/ref/...
대략 1년 전 | 0
답변 있음
How can I implement the magic formula by Pacejka in Simscape Multibody between a wheel modeled as a disk and the ground modeled as a prismatic piece?
You can look at File Exchange submission Spatial Contact Force Examples Simscape Multibody to see an example of how to add a cus...
How can I implement the magic formula by Pacejka in Simscape Multibody between a wheel modeled as a disk and the ground modeled as a prismatic piece?
You can look at File Exchange submission Spatial Contact Force Examples Simscape Multibody to see an example of how to add a cus...
대략 1년 전 | 0
답변 있음
Problem by simulating a kinematic with a singularity in SimMechanics
This message indicates you have a degree of freedom with no inertia associated with it. I was not able to download your model, ...
Problem by simulating a kinematic with a singularity in SimMechanics
This message indicates you have a degree of freedom with no inertia associated with it. I was not able to download your model, ...
1년 초과 전 | 0
답변 있음
water tank modeling in simscape
This example shows many of those concepts: https://www.mathworks.com/help/hydro/ug/aircraft-fuel-supply-system-with-three-t...
water tank modeling in simscape
This example shows many of those concepts: https://www.mathworks.com/help/hydro/ug/aircraft-fuel-supply-system-with-three-t...
1년 초과 전 | 0
답변 있음
Frictional Friction block on simscape
In the Translational Friction block, set the coulomb friction force to be mu_k*(mass*gravity). Set the Breakaway Friction Force...
Frictional Friction block on simscape
In the Translational Friction block, set the coulomb friction force to be mu_k*(mass*gravity). Set the Breakaway Friction Force...
1년 초과 전 | 0
답변 있음
An error: Undefined function 'mrdivide' for input arguments of type 'NetworkEngine.ComponentVariableCompileData'.
The documentation page for equations in Simscape tells you which equations you can use and what the requirements are. mrdivide ...
An error: Undefined function 'mrdivide' for input arguments of type 'NetworkEngine.ComponentVariableCompileData'.
The documentation page for equations in Simscape tells you which equations you can use and what the requirements are. mrdivide ...
1년 초과 전 | 0
답변 있음
Simulink Simscape: Dog Clutch fidelity
The Dog Clutch block in Simscape Driveline has multiple fidelity levels for the friction model. It can capture behavior when th...
Simulink Simscape: Dog Clutch fidelity
The Dog Clutch block in Simscape Driveline has multiple fidelity levels for the friction model. It can capture behavior when th...
1년 초과 전 | 0
답변 있음
How can I implement downforce and drag generated from a rear wing into my drag racing model using Simulink/Simscape?
If you wish to mak the downforce increase with speed, one option is to multiply it by a scaling factor that is speed dependent. ...
How can I implement downforce and drag generated from a rear wing into my drag racing model using Simulink/Simscape?
If you wish to mak the downforce increase with speed, one option is to multiply it by a scaling factor that is speed dependent. ...
1년 초과 전 | 0
답변 있음
How can I use Translational Friction and Damping blocks?
I recommend placing a Revolute Joint between your two plates and add a rotational frictional model there. If you wish to model ...
How can I use Translational Friction and Damping blocks?
I recommend placing a Revolute Joint between your two plates and add a rotational frictional model there. If you wish to model ...
1년 초과 전 | 0