답변 있음
What approach can I take to design a filter that fits (approximately) the average power spectrum of multiple signals.
Hi G, Do you have the amplitude and phase spectra for the red curve? If so, you can try using tfest, though that spike at arou...

2년 초과 전 | 0

답변 있음
How to save the result of each loop separately
One option is to use a cell array to store dissimilar objects y = [3 4]; for i=1:length(y) x{i}=zeros(y(i),2) end Thoug...

2년 초과 전 | 0

| 수락됨

답변 있음
How to enter vector coefficients to z-transform
g = [2,2.2,2.3]; a1 = [2, 5,8]; a2 =[ 1,0.3,0.4]; HZ = tf(zeros(3),'Ts',-1); for ii = 1:3 HZ(ii,ii) = tf(g(ii)*[1 2 1],...

2년 초과 전 | 1

답변 있음
Numerical error in simulink
Hi Junghyo Kim, Your question references "division by 0" but the error message has nothing to do with division by zero. The er...

2년 초과 전 | 0

| 수락됨

답변 있음
Different integration results from int method in symbolic math toolbox
Looks like a bug in the computation of F2? syms x w; assume(x,"real"); assumeAlso(w,"real"); % integration y1=exp(-1i*w*x-x...

2년 초과 전 | 1

답변 있음
Magnitude response of allpass filter - group-delay equalization of an IIR filter
Hi Jay, Here is the filter [be,ae] = ellip(4,1,40,0.2); f = 0:0.001:0.2; g = grpdelay(be,ae,f,2); % Equalize only the pass...

2년 초과 전 | 0

| 수락됨

답변 있음
Converting 4th order IIR filter to SOS (second-order sections)
Does tf2sos provide the desired result?

2년 초과 전 | 0

| 수락됨

답변 있음
Why is there no Integrator with data type single ?
How about using a Discrete Time Integrator?

2년 초과 전 | 0

답변 있음
How do create a simulink filter if I have the impulse response
Hi Joe, Why not derive the transfer function H(s) as the Laplace transform of h(t), and then implement H(s) in the Transfer Fcn...

2년 초과 전 | 0

답변 있음
Compute conditional mean from distribution
Hi Fredrik, If you just want to compute the conditional mean, why not just use the third expression for Conditional Expectation...

2년 초과 전 | 0

답변 있음
Simulating a plant in Simulink
The Zero-Order Hold block with Sample Time parameter set to an expression that evaluates to the sampling period T does the sampl...

2년 초과 전 | 0

답변 있음
Lookup Table in Simulink
Hi wafaa, If the area and volume are both represented by by 2D arrays of the same size, and if the length and width input break...

2년 초과 전 | 1

| 수락됨

답변 있음
How to convert time varying state matrix to ss ?
ss and other dynamic system models in the Control System Toolbox only support linear, time-invariant, systems, so the A-matrix i...

2년 초과 전 | 0

답변 있음
Does the 'sigmaplot' function plot the minimum or the maximum singular values of a MIMO transfer function?
I think it plots all of the singular values that are not identically zero, unless the MagUnits property is set to 'abs', in whic...

2년 초과 전 | 0

답변 있음
how to zero pad a vector to have the same amount of data as a vector with more data?
As of R2023b: paddata in_padded = paddata(in,numel(verb));

2년 초과 전 | 2

답변 있음
Why does C{1}(1) work but C(1){1} results in an invalid array index error in MATLAB?
C is 1x2 cell array C = {[1,2],'abc'} Curly brace indexing here "pops-out" the first element of C as an ordinary 1x2 vector C...

2년 초과 전 | 0

답변 있음
How to interpret the frequencies on a symmteric FFT plot.
Hi John, The very short, and loose, answer to your question is as follows. Suppose we have a signal, like x[n] = cos(2*pi/N*k*n...

2년 초과 전 | 0

답변 있음
What New Functions or Features in R2023B are of Interest?
New function svdappend sounds interesting. I wonder what typical use-cases might be? @Christine Tobler

2년 초과 전 | 0

질문


What New Functions or Features in R2023B are of Interest?
I was reading this question where Steve Lord suggested using a function expmv that is new in R2023B. I went over to the Matlab R...

2년 초과 전 | 답변 수: 2 | 0

2

답변

답변 있음
What do the states in a series connection of a plant with time delay (approximated by pade approximation) represent ?
Hi Janki, "What do the first 2 states here represent? " Each state is the state variable of the state space realization of the...

2년 초과 전 | 0

| 수락됨

답변 있음
Best practice: should a function return a row vector or a column vector
I just ran into a case where I had to make sure the output vector from a function had to have the same dimensions as a vector in...

2년 초과 전 | 2

답변 있음
I want to perform inverse Laplace transform but my code does not seem to work
Hi Carlos, ilaplace assumes that all signals are causal, which wouldn't be true in this case if a < 0. Add the appropriate ass...

2년 초과 전 | 1

| 수락됨

답변 있음
Bode plot of a 157 order transfer function
Hi Dongxu Guo, That's quite a filter! Using a tf for a for such a high order filter is not likely to work due to large roundin...

2년 초과 전 | 0

| 수락됨

답변 있음
The normal "state space" and "discrete state-space" block in Simulink have different results
Hi Christian, If the simulation step size is fixed at 1e-6, then the inherited Sample Time of the Discrete State Space block is...

2년 초과 전 | 0

| 수락됨

답변 있음
Proper way to call designfilt for filtfilt
The example above is a low pass, linear phase FIR filter. Maybe a simple delay as is implemented in lowpass is acceptable? Cuto...

2년 초과 전 | 1

| 수락됨

답변 있음
MATLAB telling me there are no real values to my step response when there are
Hi Sophie, It looks like that message will come up when calling step with a tf input with complex coefficients h = tf(1,[1+1i,...

2년 초과 전 | 0

답변 있음
How to Obtain State Space Model from Bode Plot Data
Hi Muhammad, Here is the first part of the code: T2 = readtable('E7i_CSV.csv'); ...

2년 초과 전 | 1

| 수락됨

답변 있음
Getting an equation from a signal transfer function
Hi Sifiso, Here is an example that might be helpful. Generate an input signal inputAudio = sweeptone(6,0.1); Fs = 44.1e3; N...

2년 초과 전 | 0

답변 있음
How to avoid defining variable value with simulink.
No, this can't be done in Simulink, nor in the Control System Toolbox. With G1(s), G2(s), and H(s) define as symfun objects, you...

2년 초과 전 | 0

답변 있음
Why I am not getting sample time in the discrete transfer function block.
Hi Gokula, The Discrete Transfer Fcn block is one of the Blocks for Which [Setting] Sample Time Is Not Recommended. Instead, Si...

2년 초과 전 | 0

더 보기