I am Technical Support Engineer at MathWorks. My areas of Interest are Embedded systems and

Signal Processing.

DISCLAIMER: Any advice or opinions here are my own, and in no way related that of MathWorks.

답변 있음

Change parameters in Simscape model executable

you can follow below steps to change parameters in Simscape model executable In Preference -> Simscape enable "Show runtime par...

Change parameters in Simscape model executable

you can follow below steps to change parameters in Simscape model executable In Preference -> Simscape enable "Show runtime par...

약 1달 전 | 0

| 수락됨

답변 있음

Multiple USB Cameras plugged in, only one found - Image Acquisition Toolbox

It seems like the issue is with the identical names of USB cameras connected. You can rename the USB webcams by following below ...

Multiple USB Cameras plugged in, only one found - Image Acquisition Toolbox

It seems like the issue is with the identical names of USB cameras connected. You can rename the USB webcams by following below ...

약 2달 전 | 1

답변 있음

weird error when run simulinlk

MATLAB transforms the values to complex when it is needed but Simulink does not. You can have a look at similar question: http...

weird error when run simulinlk

MATLAB transforms the values to complex when it is needed but Simulink does not. You can have a look at similar question: http...

약 2달 전 | 0

답변 있음

Model not assembled: position violation...How can I Solve Error this error ?

You can have a look at similar question: https://www.mathworks.com/matlabcentral/answers/473428-why-do-i-receive-the-following-...

Model not assembled: position violation...How can I Solve Error this error ?

You can have a look at similar question: https://www.mathworks.com/matlabcentral/answers/473428-why-do-i-receive-the-following-...

약 2달 전 | 0

답변 있음

Locating adjacent identical elements in string array

Currently MATLAB does not support any function that returns an array that shows : where the identical elements are present and t...

Locating adjacent identical elements in string array

Currently MATLAB does not support any function that returns an array that shows : where the identical elements are present and t...

약 2달 전 | 0

답변 있음

Why the Simulink s-function builder generated c file (wrapper.c) is removed after build (code generation)?

In order to the S-function block to know where to look for the _wrapper.c, you need to explicitly tell it in the S-function modu...

Why the Simulink s-function builder generated c file (wrapper.c) is removed after build (code generation)?

In order to the S-function block to know where to look for the _wrapper.c, you need to explicitly tell it in the S-function modu...

약 2달 전 | 0

| 수락됨

답변 있음

MATLAB(Simulink) 2018a

It may be due to network configuration issue. You can refer to the below link which solved the similar issue. https://www.math...

MATLAB(Simulink) 2018a

It may be due to network configuration issue. You can refer to the below link which solved the similar issue. https://www.math...

약 2달 전 | 0

답변 있음

How to create a custom target for use with a Teensy 4.0

You can refer to the below documentation link on how to create Custom Targets https://www.mathworks.com/help/ecoder/ug/sample-c...

How to create a custom target for use with a Teensy 4.0

You can refer to the below documentation link on how to create Custom Targets https://www.mathworks.com/help/ecoder/ug/sample-c...

약 2달 전 | 0

답변 있음

change the number of bins in corrplot function?

Input arguments accepted by “corrplot” function are data series to plot correlation, axeson which to plot and name value pairs. ...

change the number of bins in corrplot function?

Input arguments accepted by “corrplot” function are data series to plot correlation, axeson which to plot and name value pairs. ...

3달 전 | 0

| 수락됨

답변 있음

Can matlab access java class variable?

You can refer to the example provided in the below documentation link on how to Access Public and Private data https://www.math...

Can matlab access java class variable?

You can refer to the example provided in the below documentation link on how to Access Public and Private data https://www.math...

3달 전 | 0

답변 있음

Matrix dimensions must agree error

Addition and element wise multiplication is possible only with matrices of same dimensions. Try to make sure your matrices are ...

Matrix dimensions must agree error

Addition and element wise multiplication is possible only with matrices of same dimensions. Try to make sure your matrices are ...

3달 전 | 0

답변 있음

Open Physionet data in Matlab

The below example uses Physionet data and Classifies ECG Signals. Hope this link may helpful to you: https://www.mathworks....

Open Physionet data in Matlab

The below example uses Physionet data and Classifies ECG Signals. Hope this link may helpful to you: https://www.mathworks....

3달 전 | 0

답변 있음

Unable to install support package - installation fails

The support package installation can fail for several reasons. You can refer to the below link which answers similar question. ...

Unable to install support package - installation fails

The support package installation can fail for several reasons. You can refer to the below link which answers similar question. ...

3달 전 | 0

답변 있음

Problems with the static text box of the GUI

Assuming that you want entire directory to be displayed in a single line. To achieve this, you can adjust the Graphical layout...

Problems with the static text box of the GUI

Assuming that you want entire directory to be displayed in a single line. To achieve this, you can adjust the Graphical layout...

3달 전 | 0

답변 있음

Help me to write PAPR Reduction of OFDM system using PTS scheme

Have a look at similar question: https://www.mathworks.com/matlabcentral/answers/417224-is-there-anybody-that-have-papr-reducti...

Help me to write PAPR Reduction of OFDM system using PTS scheme

Have a look at similar question: https://www.mathworks.com/matlabcentral/answers/417224-is-there-anybody-that-have-papr-reducti...

3달 전 | 0

| 수락됨

답변 있음

read entire sheet in xlsread basic mode

“xlsread” is not recommended instead you can use “readtable” function to read entire excel sheet. You can refer to the below do...

read entire sheet in xlsread basic mode

“xlsread” is not recommended instead you can use “readtable” function to read entire excel sheet. You can refer to the below do...

3달 전 | 0

답변 있음

readcell does not import last columns when first columns are empty (2019a)

If you know the number of columns, then you can use below commands to get all columns including the empty ones. opts = spreadsh...

readcell does not import last columns when first columns are empty (2019a)

If you know the number of columns, then you can use below commands to get all columns including the empty ones. opts = spreadsh...

3달 전 | 0

| 수락됨

답변 있음

Power of white noise set in Simulink

Have a look at similar question: https://www.mathworks.com/matlabcentral/answers/457180-relationship-between-noise-power-in-a-b...

Power of white noise set in Simulink

Have a look at similar question: https://www.mathworks.com/matlabcentral/answers/457180-relationship-between-noise-power-in-a-b...

3달 전 | 0

답변 있음

Fourier series sawtooth wave

You can use “sawtooth” function in MATLAB to create a sawtooth wave. You can refer to below documentation for more information ...

Fourier series sawtooth wave

You can use “sawtooth” function in MATLAB to create a sawtooth wave. You can refer to below documentation for more information ...

3달 전 | 0

답변 있음

What is the Neutral Phase Port used for on a BLDC motor block in Simscape?

You can refer to the below documentation for more information on what is the use of Neutral phase port and how to use it. https...

What is the Neutral Phase Port used for on a BLDC motor block in Simscape?

You can refer to the below documentation for more information on what is the use of Neutral phase port and how to use it. https...

3달 전 | 0

답변 있음

How can I write a multi-band image in jp2 format?

As mentioned in the error jp2 files support either 1 channel or 3 channels. To write multi-band image in jp2 format you can fo...

How can I write a multi-band image in jp2 format?

As mentioned in the error jp2 files support either 1 channel or 3 channels. To write multi-band image in jp2 format you can fo...

3달 전 | 0

답변 있음

How to read MDF Files into Matlab?

The error you are encountering often occurs when the MDF file is not sorted. By applying a data sort to the file, it becomes rea...

How to read MDF Files into Matlab?

The error you are encountering often occurs when the MDF file is not sorted. By applying a data sort to the file, it becomes rea...

3달 전 | 0

| 수락됨

답변 있음

Why is MATLAB giving me the wrong Bode phase plot?

The Bode Phase plot which you got is correct because the transfer function is written as G=(-100)/((1+jw)(1+(-1)jw)) When you...

Why is MATLAB giving me the wrong Bode phase plot?

The Bode Phase plot which you got is correct because the transfer function is written as G=(-100)/((1+jw)(1+(-1)jw)) When you...

3달 전 | 0

답변 있음

Set New Static IP on Raspberry Pi

Hi Mathew, You can refer to the below link which points to a similar question answered by MathWorks Support Team and go throug...

Set New Static IP on Raspberry Pi

Hi Mathew, You can refer to the below link which points to a similar question answered by MathWorks Support Team and go throug...

3달 전 | 0

답변 있음

raspberry pi cameraboard not working with simulink

Hi Steffen, You can refer to the below link which points to a similar question answered by MathWorks Support Team and go throu...

raspberry pi cameraboard not working with simulink

Hi Steffen, You can refer to the below link which points to a similar question answered by MathWorks Support Team and go throu...

3달 전 | 0

답변 있음

how to remove the error

Hi Yusuf As you mentioned error in fminbnd (line 233) x= xf; fx = funfcn(x,varargin{:}; probably you would have got error m...

how to remove the error

Hi Yusuf As you mentioned error in fminbnd (line 233) x= xf; fx = funfcn(x,varargin{:}; probably you would have got error m...

3달 전 | 0

답변 있음

IP camera connection Error

The first input argument to “ipcam” function is URL. The URL is made up of the IP address of the camera, followed by a video fi...

IP camera connection Error

The first input argument to “ipcam” function is URL. The URL is made up of the IP address of the camera, followed by a video fi...

3달 전 | 0

답변 있음

Problem with creating Protected Model - "### Failed to generate all binary outputs."

Assuming that there is a problem while creating Protected model, you can follow the below documentation for how to create protec...

Problem with creating Protected Model - "### Failed to generate all binary outputs."

Assuming that there is a problem while creating Protected model, you can follow the below documentation for how to create protec...

5달 전 | 0

답변 있음

How to display the results of a for loop

As mentioned above the variable “card” is a scalar. To display the results of for loop you can create a Null vector and append...

How to display the results of a for loop

As mentioned above the variable “card” is a scalar. To display the results of for loop you can create a Null vector and append...

5달 전 | 0

답변 있음

Want to discret a simscape model (want to have fixed stepsize). It's not work. I sit more then 4 days on the problem, but can't fixed.

You can try by changing the “Solver selection” in “Configuration parameters” to “fixed-step/variable-step”and selecting “discret...

Want to discret a simscape model (want to have fixed stepsize). It's not work. I sit more then 4 days on the problem, but can't fixed.

You can try by changing the “Solver selection” in “Configuration parameters” to “fixed-step/variable-step”and selecting “discret...

5달 전 | 0