Community Profile

photo

Vinod


MathWorks

164 total contributions since 2011

Contact

Vinod's Badges

  • Knowledgeable Level 3
  • 6 Month Streak
  • Revival Level 3
  • First Answer
  • Solver

View details...

Contributions in
View by

Answered
thingSpeakPlot vs time of day.
Hi Mark, Can you use plot instead of thingSpeakPlot? Does that resovle the problem? -Vinod

약 17시간 ago | 0

Answered
Can anyone sign up in Thingspeak
Yes. If you have an existing MathWorks Account, you can sign in to ThingSpeak using that account's credentials. If you do not h...

1일 ago | 0

Answered
Is it possible to use a replacement key in a thinghttp header field?
You will need to do this using a MATLAB Analysis app. If you want to schedule it, you can schedule the MATLAB Analysis using the...

2달 ago | 0

| accepted

Answered
Is it possible to visualize the 1. derivation of a first curve as a separate second curve in the free of charge Thingspeak? I want to detect high value changes in the first curve.
You can always plot(diff(array)) where array contains the data you read from a ThingSpeak channel using thingSpeakRead.

2달 ago | 0

Answered
how do I extract data from a single field at 12 hour intervals without hitting the 8000 datapoint limit?
Allan, Can you describe your use case and application in further detail? How will this data that is older than the most recen...

7달 ago | 1

Answered
ThingSpeak Channel Status Update field
Have you enabled the "Show Status" checkbox on the channel setting page? If so, you should see "good" in your channel status w...

11달 ago | 0

Answered
Error using thingSpeakWrite 'Values' must have a maximum of 8 elements.
Can you share the code you are using to update your ThingSpeak channel? Please replace your ThingSpeak API key with ___XXX___ so...

11달 ago | 0

Answered
Re-posed this question
Could you help me understand why almost every one of your posts tagged with "Statistics and Machine Learning Toolbox" and "Data ...

약 1년 ago | 0

Submitted


Upload files to your DropBox folder from MATLAB
This function allows a user to upload files using MATLAB to DropBox(TM).

약 1년 ago | 18 downloads |

Answered
How to capture a spectrum from a R&S spectrum analyzer?
See answer to the <https://www.mathworks.com/matlabcentral/answers/337575 question here> .

1년 이상 ago | 0

Answered
Controlling an SCPI instrument in Simulink
Perhaps you can use the Simulink <https://www.mathworks.com/help/simulink/slref/whileiterator.html While Iterator> to run a subs...

1년 이상 ago | 0

| accepted

Answered
How to connect to Keysight oscilloscope using the oscilloscope() function?
Try >> o=oscilloscope; >> o.Reource = 'USB0::0x2A8D::0x1769::MY56310266::INSTR' >> o.Driver = 'AgInfiniiVision' >>...

2년 이하 ago | 0

Answered
Instrument control toolbox error when creating interface object
Install <https://www.mathworks.com/matlabcentral/fileexchange/52848 this support package> and try again. If you are still seeing...

2년 이하 ago | 0

Answered
How to capture a spectrum from a R&S spectrum analyzer and find its maximum?
You could start by modifying <https://www.mathworks.com/help/instrument/examples/reading-inphase-and-quadrature-iq-data-from-a-s...

2년 이하 ago | 0

Answered
Invalid MEX file error while running CAN communication demo
I suspect you don't have your software installed correctly. Specifically I suspect you need to install the Hardware Support Pac...

2년 이하 ago | 0

Answered
I have an agilent 1002A oscilloscope.It is provided with an USB Port So how can i interface it with MATLAB
You should be able to modify this example with the SCPI commands for your oscilloscope: https://www.mathworks.com/matlabcentr...

2년 이하 ago | 0

Answered
DAQ.getdevices works in MATLAB 2015?
According to the <https://www.mathworks.com/help/daq/ref/daq.getdevices.html documentation page>, the function was introduced in...

2년 이하 ago | 0

Answered
How does the DAQ demo adaptor work?
The demo adaptor contains all the source code to add support for any device you wish in Data Acquisition Toolbox. The source cod...

2년 이하 ago | 0

Answered
So what is the alternative to Data Acquisition Toolbox in all 64bit setup?
Support for Data Acquisition using Simulink from NI hardware is available in the latest version of MATLAB & Simulink. What versi...

2년 이하 ago | 0

Answered
questions about bytesavailablefcncount of a serial port.
Behind the scenes, MATLAB is continuously polling the serial port for data and storing the results in a local buffer. The ...

약 2년 ago | 2

| accepted

Answered
VISA Serial Read - Unsuccessful read: A timeout occurred before the Terminator was reached.
What you are seeing is normal. Please check the <https://www.mathworks.com/help/instrument/fscanf.html Rules for completing a re...

약 2년 ago | 1

| accepted

Answered
Do you have any product that can communicate through Modbus protocol?
Instrument Control Toolbox added support for MODBUS in R2017a. Take a look at the functionality documented <https://www.mathwork...

약 2년 ago | 1

Answered
how to send SCPI command with driver based communication?
This depends on a number of things, but mainly if/how the driver and the hardware implement device locking. You can try this - w...

약 2년 ago | 0

Answered
How can I receive UDP broadcast data in MATLAB using Instrument Control Toolbox?
Here's a <http://www.mathworks.com/matlabcentral/fileexchange/59156 file exchange example> that shows you how you can broadcast ...

약 2년 ago | 0

Answered
How to implement a TCP/IP connection to Lego Mindstroms EV3 hardware?
Are you sure you really want to do it at that low level? Perhaps the <https://www.mathworks.com/hardware-support/lego-mindst...

약 2년 ago | 1

Answered
Multiple DAQ Sessions in Background
You can have multiple DAQ sessions with different devices, just not multiple sessions with the same device. In your applicati...

약 2년 ago | 1

Answered
Bitalino device not detected by Bitalino support package
Have you changed the bitalino's friendly name from 'bitalino' to something else? The default constructor assumes that the Bitali...

약 2년 ago | 0

| accepted

Answered
How to capture real time data using Tektronix oscilloscope?
There is a <https://www.mathworks.com/help/instrument/using-quick-control-oscilloscope.html#bs8vvdm good example in the document...

2년 이상 ago | 0

Answered
CC2541 and MATLAB Connection
I'm no familiar with this device. Does it support a Bluetooth Serial Port Profile (SPP)? If so, you should be able to connect to...

2년 이상 ago | 0

Answered
Creating a standalone executable with Vehicle Network Toolbox commands
This should be possible to do. Please contact <http://www.mathworks.com/support/contact_us technical support> .

2년 이상 ago | 0

Load more