The Waveform Suite is now developed as part of the geoscience community codes, linked below.
MATLAB application example for Agilent Infiniium and InfiniiVision oscilloscopes
OCTSEG is a GUI and function collection to segment and visualize retinal layers on OCT data.
Download Bible translations from a GUI
Solve large-scale and complex dynamic optimization problems efficiently
Similar interface to linprog but solution with nonlinear programming solvers such as IPOPT
Ever wish after creating a GOTO block, you could automatically have a corresponding FROM appear?
Any modeling style using Goto/From tags typically involved creating a Goto tag, then dragging a From tag from the Simulink library and re-entering all the information taht was jsut entered into the
In Simulink, automatically names signals and blocks in certain use cases.
Very often in Simulink, it is desireable to have naming consistency between signals and certain blocks like inports, outports, tags, scopes, etc. These functions are examples of scripts that
MATLAB toolbox for reading one or more DICOM series from a directory
reading them and accessing DICOM tags in a consistent manner.Important note: We know from experience that there is a lot of variation in DICOM files and the code may not deal with all DICOM files properly.
Simple ray-tracing engine for Matlab.
Capable of generating 802.11ad Control , SC and OFDM PHY waveforms
Goto tag that automatically inherits input signal name as its Name and Tag
When creating a large number of Goto blocks, it can be laborious to update the tags to match the signal names that they connect to. This will automate the task for any number of blocks. Authored by
Interactively analyse your solar heater's/PV performane
version 184.108.40.206Oliver Wetter
How to use the Embedded coder with a modular automation system
version 220.127.116.11Fernando Diaz-del-Rio
version 18.104.22.168Sungwoo Park
constraint-reduced predictor-corrector interior point method for semidefinite programming
version 22.214.171.124Eric A. Lehmann
Simulates audio data at one or more microphones from a source moving in a reverberant environment
version 126.96.36.199Eric A. Lehmann
Fast simulation of audio data at one or more microphones from a source moving in a reverberant room
Read / Write raw Dicom tags with large dictionary, for small file manipulations, like anonymize
There are two main files, "ReadDicomElementList" which will read all tags of a dicom file into a struct and "WriteDicomElementList" which can write them back to a new file.A large dicom dictionary is
version 188.8.131.52Hannes Mogensen
Add legend to axes based on values from plot handles Tag property
Instead of adding a legend manually and making sure the colors are consistent, use the 'Tag' property for each plot to separate them. Then use the function add_legend to add a legend. The function
The Signature Tool extracts the interface of a Simulink subsystem.
version 184.108.40.206Fernando Diaz-del-Rio
Lithium ion battery characterization, state estimation, cell balancing, and thermal management
Effecthttps://www.mathworks.com/content/dam/mathworks/tag-team/Objects/i/71900-ieee-2012-high-fidelity-lithium-battery-model-with-thermal-effect.pdf SAE 2013: Simplified Extended Kalman Filter Observer for Battery SOC Estimationhttps://www.mathworks.com/content/dam/mathworks/tag-team/Objects/s/76108-sae-2013-simplified-ekf-battery-model.pdf SAE
Toolbox for importing data saved by IDQ time tag board and included software
is the ability tocompress time-tag data into a more manageable file size. Thecompression is lossless and reduces the file size by a factor of 10 to15. This compression is provided via the dzip and
First order linear system simulation with different tools