how to sampling the signal in order to match the two signal?

조회 수: 4(최근 30일)
Keshasni Earichappan 2021년 8월 14일
답변: Star Strider 2021년 8월 15일
Hi.i am having trouble to set both data (mc & torque) on the same time axis.MC-voltage signal need to sampled at 5 kHz and low-pass filtered with a cutoff frequency 10 Hz in order to match with the torque(maybe).Basically,I need to match the two different time series into one same time series.Hope anyone can help me to figure it out.Thanks in advance
댓글 수: 1표시숨기기 없음
dpb 2021년 8월 14일
Look at resample in Signal Processing Toolbox...

댓글을 달려면 로그인하십시오.

채택된 답변

Star Strider 2021년 8월 15일
The first 2 column in ‘TORQUE’ are missing, so they are removed here.
% nrmissing = [nnz(ismissing([C1{:,1}])) nnz(ismissing([C1{:,2}])) size(C1,1)]
T1 = removevars(T1,{'Var1','Var2'})
T1 = 7967×2 table
TIME TORQUE ____ ______ 0 0 10 0.7 20 1.1 30 6.5 40 6.5 50 6.4 60 6.5 70 6.4 80 6.1 90 6.1 100 6.4 110 7.1 120 7.9 130 8.3 140 7.9 150 8
T2 = 90483×2 table
Time MC[v] ________ ______ 0 1.8297 0.000999 1.8289 0.001998 1.8297 0.002997 1.8297 0.003996 1.8305 0.004996 1.8289 0.005996 1.8297 0.006997 1.8313 0.007996 1.8305 0.008995 1.8281 0.009994 1.8297 0.010995 1.8305 0.011994 1.8305 0.012995 1.8297 0.013994 1.8297 0.014993 1.8305
Fs = 100; % Resample To 100 Hz Sampling Frequency
[TORQUEr,T_TIMEr] = resample(T1.TORQUE, T1.TIME, Fs);
[MCvr,V_TIMEr] = resample(T2.('MC[v]')-mean(T2.('MC[v]')), T2.Time, Fs);
MCvr = MCvr + mean(T2.('MC[v]'));
figure
subplot(2,1,1)
plot(T_TIMEr, TORQUEr)
grid
xlabel('t')
ylabel('Torque (Resampled)')
subplot(2,1,2)
plot(V_TIMEr, MCvr)
xlabel('t')
ylabel('MC[v] (Resampled)')
grid They both have the same 100 Hz sampling frequencies, however they retain significantly different time vectors.
.

댓글을 달려면 로그인하십시오.

추가 답변(1개)

Sulaymon Eshkabilov 2021년 8월 14일
% They perfectly match as you can see the plot below.
plot(MC.TIME, MC.TORQUE, 'bx', Torque.TIME, Torque.TORQUE, 'r'), legend('MC','Torque') % If you need to resample them then, apply resample()
% See here: https://www.mathworks.com/help/signal/ref/resample.html
댓글 수: 3표시숨기기 이전 댓글 수: 2
Keshasni Earichappan 2021년 8월 15일
hi @Scott MacKenzie & @Sulaymon Eshkabilov....sorry i had attached the wrong MC.txt file jn..here i have attached the updated one..I need to match the two different time series into one same time series(sampling period).Is it possible? :)

댓글을 달려면 로그인하십시오.

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!