Contact Forces/Torques for Robotics Applications

조회 수: 7(최근 30일)
Hakan Ertugrul
Hakan Ertugrul 2021년 3월 10일
답변: J Chen 2021년 6월 2일
I am using Robotics Systems Toolbox in Simulink and performing dynamical simulation. The simulation consists of a free movement and then a contact arised from a peg-in-hole task.
Because of the contact, I need to pass the reaction forces and moments back to the robot (by multiplying with the transpose of the jacobian of the end-effector of the robot in order to convert them to joint torques) to include contact effects on the robot.
As fas as I see, either Simulink Multibody Contact Forces Libary or Spatial Contact Force Block only gives normal forces in scalar, not vectoral.
Is there a way to get forces and torques in vector format to feed robot for contact dynamics effects?
Thanks in advance.
Best regards,
  댓글 수: 2
Hakan Ertugrul
Hakan Ertugrul 2021년 5월 13일
Dear Yifeng,
Thanks for your reply and interest. I am very eager to see if possible.
Best regards,

댓글을 달려면 로그인하십시오.


J Chen
J Chen 2021년 6월 2일
The Spatial Contact Force Block will automatically apply the forces to the elements connected to its two ports. You don't need to feed the forces yourself. The magnitude of the forces can be outputed by checking the Sensing option of the block.

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by