MATLAB Answers

Design PI regulator with constrictions

조회 수: 5(최근 30일)
Alejandro Fernández
Alejandro Fernández 2020년 10월 23일
댓글: Alejandro Fernández 2020년 10월 23일
Hi, I needed to know if anyone knows how to carry out the next design of a PI C(s) regulator using the rltool or similar tool. I explain below what what I need to do.
  • Start from a step input that can vary in a range of +-20.
  • The output of the controller can only be within the range of +-2.
  • The output of the regulator can only be between values of +-2.
  • An over-shoot of less than 5% must be present at any time and the settling time must be less than 1s but never less than 0.5s.
The main problem I have is that I don't see a way to implement Simulink's saturation block in the rltool options... or if someone knew how to link the variables so that what I calculate in rltool would be reflected in the transfer function of Simulink's controller would also be of great help to me.
Thank you very much for everything.
  댓글 수: 2
Alejandro Fernández
Alejandro Fernández 2020년 10월 23일
Ok! Thank you for all you help :D

댓글을 달려면 로그인하십시오.

답변(0개)

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by