ADI RF SOM (2x2) Carrier Support in Communications Toolbox Support Package for Xilinx Zynq-Based Radio

Is ADRV-PackRF (https://wiki.analog.com/resources/eval/user-guides/pzsdr/carriers/packrf) Supported in Communications Toolbox Support Package for Xilinx Zynq-Based Radio?

ADRV-PackRF is a developing kit based on ADI RF SOM (2x2).

I tried to run the kit according to the instructions.

I create boot SD card ( as described in https://www.mathworks.com/help/supp=

ortpkg/xilinxzynqbasedradio/ug/manual-host-radio-hardware-setup.html )

When I uboot my equipment i see in Zynq UART console:

#############

U-Boot 2017.01 (Aug 26 2019 - 10:27:06 +0100)

Model: Zynq PicoZed SDR2 Board

Board: Xilinx Zynq

I2C: ready

DRAM: ECC disabled 1 GiB

MMC: sdhci@e0100000: 0 (SD)

reading uboot.env

In: serial@e0001000

Out: serial@e0001000

Err: serial@e0001000

Model: Zynq PicoZed SDR2 Board

Board: Xilinx Zynq

Net: ZYNQ GEM: e000b000, phyaddr 7, interface rgmii-id

eth0: ethernet@e000b000

Hit any key to stop autoboot: 0

Device: sdhci@e0100000

Manufacturer ID: 74

OEM: 4a60

Name: USD

Tran Speed: 50000000

Rd Block Len: 512

SD version 3.0

High Capacity: Yes

Capacity: 14.9 GiB

Bus Width: 4-bit

Erase Group Size: 512 Bytes

reading uEnv.txt

** Unable to read file uEnv.txt **

Loading bitstream from SD/MMC/eMMC to RAM..

Device: sdhci@e0100000

Manufacturer ID: 74

OEM: 4a60

Name: USD

Tran Speed: 50000000

Rd Block Len: 512

SD version 3.0

High Capacity: Yes

Capacity: 14.9 GiB

Bus Width: 4-bit

Erase Group Size: 512 Bytes

reading system.bit

13321511 bytes read in 1113 ms (11.4 MiB/s)

design filename =3D "system_top;UserID=3D0XFFFFFFFF;Version=3D2018.2"

part number =3D "7z035ifbg676"

date =3D "2019/04/03"

time =3D "23:38:59"

bytes in bitstream =3D 13321404

zynq_align_dma_buffer: Align buffer at 10006b to fff80(swap 1)

Copying Linux fro

###############

Answer 1

[Francisco Salomon]

Hello Anton,

The ADRV-PackRF is not supported by Mathworks's hardware support packages.

Please have a look on the ADI Transceiver Toolbox to see if that suits you:

https://www.mathworks.com/matlabcentral/fileexchange/72645-analog-devices-inc-transceiver-toolbox

Thanks,

Francisco

[Anton Zhivchikov]

Does Mathworks plan to add support for ADRV-PackRF in the future?

[Francisco Salomon]

At the moment, it doesn't. Again, see ADI Toolbox for full support.