save multiple plots in user specified folder in jpg form

Hi,

I am plotting multiple plots in single code and I want to save all the plots into user specified folder in jog form.

Please help me with this.

The code to generate plots is shown below

    
figure('Name','Pressure In','NumberTitle','off')

x = out.Pin(:,1);
y = out.Pin(:,2);
 plot(x,y);
grid on
title('Pump Inlet Pressure');
xlabel('Time');
ylabel('Pressure');


figure('Name','Pressure Out','NumberTitle','off')
x1 = out.Pout(:,1);
y1 = out.Pout(:,2);
plot(x1,y1);
grid on
title('Pump Outet Pressure');
xlabel('Time');
ylabel('Pressure');


figure('Name','Heat Generation','NumberTitle','off')
hold on
x2 = out.Q2(:,1);
y2 = out.Q2(:,2:end);
plot(x2,y2);
grid on
title('Heat Generation');
xlabel('Time');
ylabel('Heat Flow');
legend('Battery Module 1','Battery Module 2','Battery Module 3','Battery Module 4','Battery Module 5','Battery Module 6','Battery Module 7','Battery Module 8','Battery Module 9','Battery Module 10','Battery Module 11','Battery Module 12','Battery Module 13','Battery Module 14');


figure('Name','Total Heat','NumberTitle','off')
hold on
x3 = out.Q_25_100(:,1);
y3 = out.Q_25_100(:,2);
plot(x3,y3);
grid on
title('Heat Generation');
xlabel('Time');
ylabel('Heat Flow');
legend('Summed Heat Flow');


figure('Name','SOC','NumberTitle','off')
x4 = out.SOC_25_100(:,1);
y4 = out.SOC_25_100(:,2);
 plot(x4,y4);
grid on
title('Battery State of Charge');
xlabel('Time');
ylabel('SOC');
legend('SOC');


figure('Name','Battery Temperatures','NumberTitle','off')
hold on
x2 = out.T_25_100(:,1);
y2 = out.T_25_100(:,2:end);
 plot(x2,y2);
grid on
title('Battery Module Temperatures');
xlabel('Time');
ylabel('Temperature');
legend('Battery Module 1','Battery Module 2','Battery Module 3','Battery Module 4','Battery Module 5','Battery Module 6','Battery Module 7','Battery Module 8','Battery Module 9','Battery Module 10','Battery Module 11','Battery Module 12','Battery Module 13','Battery Module 14');


figure('Name','Chiller Temperature In','NumberTitle','off')
hold on
x2 = out.Tin_25_100(:,1);
y2 = out.Tin_25_100(:,2:end);
plot(x2,y2);
grid on
title('Chiller Inlet Temperature');
xlabel('Time');
ylabel('Temperature');
legend('Temperature');


figure('Name','Chiller Temprature Out','NumberTitle','off')
hold on
x2 = out.Tout_25_100(:,1);
y2 = out.Tout_25_100(:,2:end);
plot(x2,y2);
grid on
title('Chiller Outlet Temperature');
xlabel('Time');
ylabel('Temperature');
legend('Temperature');

Answer 1

[KSSV]

Read about saveas. After the plot you can use:

saveas(gcf,'Figure1.jpg')

[Harish M Y]

Thanks, this works for one figure.

I want all the figures to be converted into jpg format and save in user specified folder using uigetdir() with the figure names i mentioned in the code automatically.

[KSSV]

If you are plotting in a figure:

for i = 1:10
    % plot here 
    imagename = [num2str(i),'.png'] ;
    saveas(gcf,imageName)
end