comm.SDRDevADIRFSOM

(To be removed) Interface with ADI RF SOM radio hardware

The comm.SDRDevADIRFSOM radio object will be removed in a future release. Use the comm.SDRDevAD936x radio object instead. For more information, see Compatibility with Previous Releases.

Description

Create a comm.SDRDevADIRFSOM radio object to interface with ADI RF SOM radio hardware. With this object, you can configure the radio hardware and the host computer for proper communication.

Creation

To create a comm.SDRDevADIRFSOM radio object, use the sdrdev function with argument 'ADI RF SOM'.

dev = sdrdev('ADI RF SOM')

Properties

expand all

Name of Xilinx Zynq-based radio hardware, specified as 'ADI RF SOM'.

IP address of the radio hardware, specified as a dotted-quad character vector.

The IPAddress property of the radio object must match the physical IP address of the radio hardware assigned during hardware setup. For more information, see Guided Host-Radio Hardware Setup. By default, this IP address is '192.168.3.2'. If you configure the radio hardware with an IP address other than the default, update the IPAddress property of the radio object.

For example:

dev = sdrdev('ADI RF SOM');
dev.IPAddress = '192.168.30.2';

Object Functions

downloadImageDownload SD card image or bitstream file
infoGet radio hardware information
setAddress(To be removed) Change IP address, subnet mask, or gateway used by radio hardware
setupSession(To be removed) Initialize environment for current MATLAB session
setupTools(To be removed) Set up MATLAB to work with third-party tools
testConnectionTest connection between host and radio hardware

Examples

collapse all

dev = sdrdev('ADI RF SOM')
dev = 


SDR device: comm.SDRDevADIRFSOM

   Properties:
     IPAddress: '192.168.3.2'
    DeviceName: 'ADI RF SOM'

Introduced in R2017b