Model Configuration Parameters for Xilinx Zynq ZedBoard

Hardware Implementation Pane Overview

1. In the Simulink^® Editor, select Simulation > Model Configuration Parameters.

2. In the Configuration Parameter dialog box, click Hardware Implementation.

3. Set the Hardware board parameter to ZedBoard.

4. The parameter values under Hardware board settings are automatically populated to their default values.

   You can optionally adjust these parameters for your particular use case.

5. Click Apply.

For more information on selecting a hardware support package and general configuration settings, see Hardware Implementation Pane (Simulink).

Operating System Options

Parameter	Description	Default Value
Base Rate Task Priority	Sets the static priority of the base rate task in the operating system.	40

Board Parameters

Parameter	Description	Default Value
Device Address	Network address of hardware board or device.	192.168.1.10
Username	Login username on hardware board or device.	root
Password	Login password on hardware board or device.	root

Clocking

Parameter	Description	Default Value
CPU Clock (MHz)	The CPU clock frequency in MHz.	1000

Build Options

Parameter	Description	Default Value
Build Action	Defines how Embedded Coder® responds when you build your model.	Build, load, and run

External Mode

Parameter	Description	Default Value
Communication Interface	Transport layer used to exchange data between the development computer and hardware.	TCP/IP
Run external mode in a background thread	Execute the external mode engine in the generated code in a background task.	disabled
Port	IP port of the hardware board.	17725
Verbose	Enable view of the external mode execution progress and updates in the Diagnostic Viewer.	disabled