Deployment

Build the model that loads and runs an executable on the target hardware.

How to deploy Simulink® models and interact with Xilinx® Zynq® Platforms connected to your development computer.

Topics

Setup Xilinx Zynq Platform and Software

Install Xilinx software and set up the hardware

Build and Run Executable on Xilinx Zynq Platform

Build and run executable on Xilinx Zynq platform.

Stop or Restart Executable Running on Xilinx Zynq Platform

Stop or restart an executable running on Xilinx Zynq platform

Signal Monitoring and Parameter Tuning

Overview of the operation of external with attached hardware boards.

Communicating with the FPGA IP core on the Xilinx Zynq Platform using AXI4-Lite protocol

This example shows you how to communicate with the FPGA IP core on the Zynq hardware using AXI4®-Lite protocol.

Field-Oriented Control of a Permanent Magnet Synchronous Machine

This example shows how you can model a controller and implement it on a Xilinx® Zynq™-7000 All Programmable SoC target.

Troubleshooting

Get IP Address of Xilinx Zynq Platform

You can get the IP address of the Xilinx Zynq platform from the MATLAB® Command Window or using the Linux® command line.

Command Line Session with Xilinx Zynq Platform

Open a serial command-line session with Xilinx Zynq platform.