Design custom filter for Analog Devices AD9361 RF chip
designCustomFilter( opens the ADI
filter wizard application. Use the ADI filter wizard to change the default
filter design applied to the filter chain in the receiver or transmitter
object™ specified by
x. The wizard enables you to
design a custom filter for the Analog
Devices® AD9361 RF chip based on the
BasebandSampleRate property of the object. You can
adjust and optimize the settings for calculating the analog filters, the
interpolation and decimation filters, and the FIR coefficients.
When applying a custom filter to a
UseCustomFilter property of the object
is set to
true. To switch between the default and your custom
filter design, set the
UseCustomFilter property to
The ADI filter wizard requires the following MathWorks® products:
Signal Processing Toolbox™
DSP System Toolbox™
For instructions on operating the ADI filter wizard, visit the Analog Devices website at MATLAB Filter Design Wizard for AD9361.
For more information, see Baseband Sampling Rate and Filter Chains.
Create a transmitter System object, then open the ADI Filter Wizard.
tx = sdrtx('E3xx'); designCustomFilter(tx)
Design a new filter. To transfer the new filter settings to the object, click Apply filter design.