HTS221 Humidity Sensor
Measure relative humidity and ambient temperature from Humidity sensor
Simulink Support Package for Raspberry Pi Hardware / Sense HAT
Measure the relative humidity and the ambient temperature using the Humidity sensor (HTS221) on board Raspberry Pi SenseHAT.
Humidity — Relative humidity output port
The relative humidity measured in percentage from the Humidity sensor.
Temperature — Ambient temperature output port
The ambient temperature measured in degree Celsius from the Humidity sensor.
Board — Model of the Raspberry Pi™ board to which the SenseHAT is connected
Pi 2 Model
B (default) |
Model B Rev1 |
Model B Rev2 |
Model B+ |
Pi 2 Model B |
Pi 3 Model B
Select the Raspberry Pi hardware to which the SenseHAT is connected.
Sensor output data rate (ODR) — Rate at which the sensor measures data
12.5 Hz (default) | 1 Hz | 7 Hz
The rate at which the Humidity sensor measures relative humidity and ambient temperature.
Sample time — Frequency at which data is measured data is read from Humidity sensor
0.1 (default) | scalar
Specify how often this block reads the measured data from the Humidity sensor.
Introduced in R2007a