This is machine translation

Translated by Microsoft
Mouseover text to see original. Click the button below to return to the English version of the page.

Note: This page has been translated by MathWorks. Click here to see
To view all translated materials including this page, select Country from the country navigator on the bottom of this page.

MATLAB Support Package for BeagleBone Black Hardware

Interact with BeagleBone Black from MATLAB

MATLAB® Support Package for BeagleBone® Black Hardware enables you to communicate with a BeagleBone Black remotely from a computer running MATLAB. You can acquire data from sensors and imaging devices connected to the BeagleBone Black and process them in MATLAB. You can also communicate to other hardware through the GPIO, serial, I2C, and SPI pins.

Installation and Setup

Install support for the hardware, update the firmware, and connect to the hardware

Connection to BeagleBone Black Hardware

Create a connection to BeagleBone Black hardware


Use the BeagleBone Black LED


Use the BeagleBone Black GPIO pins

Serial Port

Use the BeagleBone Black serial port

I2C Interface

Use the BeagleBone Black I2C interface

SPI Interface

Use the BeagleBone Black SPI interface


Use the BeagleBone Black pulse-width modulation module


Use the BeagleBone Black analog-to-digital converter (ADC) module

Web Camera

Use the BeagleBone Black web camera


Use the Linux® command shell and manage files on BeagleBone Black hardware