Help Center Help Center

Deployment

Build the model that loads and runs an executable on the target hardware

Topics

Build and Run Executable on BeagleBone Black Hardware
Build and run executable on BeagleBone^® Black hardware.
Stop or Restart Executable Running on BeagleBone Black Hardware
Stop or restart an executable running on BeagleBone Black hardware.
Run an Executable on Remote BeagleBone Black Hardware
You can configure a model to load and run executables on a remote board using a network connection instead of the supplied USB cable.
Host-Target Communication with External Mode Simulation
Tune parameters and monitor signals through communication channel between development computer and target hardware.

Troubleshooting

Detect Run-Time Errors

Detect run-time errors.

Get the IP Address of a BeagleBone Black Board

To get the IP address of the BeagleBone Black hardware that the host computer connected to most recently:

Open an SSH Command-Line Session with BeagleBone Black Hardware

Open an SSH Command-Line Session with BeagleBone Black Hardware.

Tune and Monitor Executable Running on BeagleBone Black Hardware

Use your host computer to monitor and control an application running on BeagleBone Black hardware.