- Build and Run Executable on BeagleBone Black Hardware
Build and run executable on BeagleBone® Black hardware.
- Stop or Restart Executable Running on BeagleBone Black Hardware
Stop or restart an executable running on BeagleBone Black hardware.
- Run an Executable on Remote BeagleBone Black Hardware
You can configure a model to load and run executables on a remote board using a network connection instead of the supplied USB cable.
- Host-Target Communication with External Mode Simulation
Tune parameters and monitor signals through communication channel between development computer and target hardware.
Detect run-time errors.
To get the IP address of the BeagleBone Black hardware that the host computer connected to most recently:
Open an SSH Command-Line Session with BeagleBone Black Hardware.
Use your host computer to monitor and control an application running on BeagleBone Black hardware.