Model Configuration Parameters for ARM Cortex-R Processors

Hardware Implementation Pane Overview

Configure hardware board to run Simulink® models.

  1. In the Simulink Editor, select Simulation > Model Configuration Parameters.

  2. In the Configuration Parameter dialog box, click Hardware Implementation.

  3. Set the Hardware board parameter to TI Hercules RM57Lx Launchpad.

  4. The parameter values under Hardware board settings are automatically populated to their default values.

    You can optionally adjust these parameters for your particular use case.

  5. Click Apply to apply the changes.

For more information on selecting a hardware support package and general configuration settings, see Hardware Implementation Pane (Simulink).

Operating system options

ParameterDescriptionDefault Value

Base Rate Task Priority

Sets the static priority of the base rate task in the operating system.

14

Build Options

ParameterDescriptionDefault Value

Build action

Defines how Embedded Coder® responds when you build your model.

Build, load, and run

Flash erase options

Defines how Embedded Coder writes the new build to the flash memory.

Entire Flash

Clocking

ParameterDescriptionDefault Value

CPU Clock Frequency (MHz)

The CPU clock (GCLK1) frequency in MHz.

300

System Clock Frequency (MHz)

The System Clock (HCLK) frequency in MHz.

150

Primary Peripheral Clock (MHz)

The peripheral clock (VCLK) frequency in MHz.

75

Serial Connectivity

ParameterDescriptionDefault Value

Serial port

Serial port on the hardware board.

COM1

Baud rate

Set the baud rate of the serial port on the hardware.

115200

External Mode

ParameterDescriptionDefault Value

Communication interface

Transport layer used to exchange data between host computer and hardware.

Serial

Serial port

Serial port on the hardware board.

COM1

Baud rate

Set the baud rate of the serial port on the hardware.

115200

Wait for a start packet from the host before execution

Wait for a start packet from the host before execution.

Enabled