Model Configuration Parameters for ARM Cortex-based VEX Microcontroller

Hardware Implementation Pane Overview

Default Hardware Implementation Pane

Configure hardware board to run Simulink^® models.

1. In the Simulink Editor, select Simulation > Model Configuration Parameters.

2. In the Configuration Parameter dialog box, click Hardware Implementation.

3. Set the Hardware board parameter to ARM Cortex-based VEX Microcontroller.

4. The parameter values under Hardware board settings are automatically populated to their default values.

   You can optionally adjust these parameters for your particular use case.

5. Click Apply to apply the changes.

For more information on selecting a hardware support package and general configuration settings, see Hardware Implementation Pane.

Clocking

Parameter	Description	Default Value
CPU Clock (MHz)	The CPU clock frequency in MHz.	168

Build Options

Parameter	Description	Default Value
Build action	Defines how Simulink Coder™ responds when you build your model.	Build, load, and run

External Mode

Parameter	Description	Default Value
Communication interface	Transport layer used to exchange data between host computer and hardware.	Serial
Set host COM port	Method to set the COM port that your host computer uses to download the executable on the hardware board.	Automatically
COMPort	The COM port used by the target hardware.	1
Verbose	View external mode execution progress and updates.	on