Main Content

Working with Android™ Audio File Write Blocks

This example illustrates the usage of Audio File Write block to save processed audio data or recorded audio data.


Before you start with this example, we recommend that you complete the Getting Started with Android™ Devices example.

Required Products

To run the model, download and install:

Required Hardware

  • Android™ device

  • Headphones with in-line microphone (recommended)

  • USB cable


To demonstrate retrieving and saving of an audio file, the example uses a Simulink® model, androidAudioFileWriteInputControl.


The contents of the subsystem in the model is as shown in this image.

In this model, the voice captured using the Audio Capture block and the audio data read using Audio File Read block are mixed. The Audio Playback block plays the mixed audio data. The Audio File Write block writes this audio data to a file.

Step 1: Configure the Simulink Model

1. Open the androidAudioFileWriteInputControl model.

2. In the Modeling tab, select Model Settings.

3. In the Configuration Parameters dialog box, select Hardware Implementation. Verify that the Hardware board parameter is set to Android Device.

4. In the model, click the Hardware tab and then click Build, Deploy & Start. The application starts running on the device. After audio processing is complete, press the back button or close the application.

Step 2: Retrieve Audio File from Android Device

The,filetype) function is used to get the audio file from the device. Filename and Filetype in the function are the File name and File type parameters specified in the block parameters dialog. Also, ensure that your Android device is connected to the development computer.

Open the block parameters dialog. The File name parameter specified will be used as the file name for the file saved on the Android device. The File name of the audio data will be of the format filename_date_time.filetype.

The Audio File Write block supports WAV and M4A types of file formats. The file format of the output file depends on the File type parameter selection.

Step 3: Control Audio Data to be Saved in the File

You can control the audio data to be saved in the file using control input port. This port accepts only 0,1 and 2 as input. The control input will be available when the Record Control parameter in the block parameters dialog for Audio File Write block is set to Input port. When the control input is set to 0, saving of audio data stops and audio file closes. When the control input is set to 1, a new file is created, if not created already, else saving of audio data continues. When control input is set to 2, audio data will not be saved and the recording of the audio data to the file pauses.

Deploy the model again or open the deployed app on your Android device. The slider in the app can be used to control the audio data recorded to the file. When the current state of the slider is 1, the data records in the file. If the slider value is changed to 2, audio data recording pauses. To resume recording, change the slider value to 1. Change the slider value to 0 to stop recording and close the file.

Now change the slider value to 1 to create a new file with name soundmix_date_time.wav. Change the slider value to 0 to stop recording or close the app.

Perform Step 2 to retrieve the saved files. There will be two files with different timestamp.

Step 4: Save Audio Data as an M4A File

1. In the androidAudioFileWriteInputControl model, open the block parameters dialog for Audio File Write block.

2. Select m4a for File type parameter and then select the required Bit rate value. Supported bit rates are 24 kbps, 128 kbps, and 192 kbps.

3. Deploy the model on the phone. Record the audio data and then retrieve the audio file using Step 2.

Step 5: Record Audio Data for a Specified Time

In this model, you can specify the record time in the Max record time parameter from the block parameters dialog of the Audio File Write block.


In this example, audio data will be recorded to the file for 60 seconds as shown in this image.

Deploy the model on the phone. Record the audio data and then retrieve the audio file using Step 2.

More About

Audio File Write