Main Content

Six-Pulse Gate Multiplexer

Multiplex gate input signals to Converter block

  • Library:
  • Simscape / Electrical / Semiconductors & Converters / Converters

  • Six-Pulse Gate Multiplexer block

Description

The Six-Pulse Gate Multiplexer block routes gate voltage signals to the six switching devices in a Converter (Three-Phase) block. The block multiplexes the six separate gate signals into a single vector.

When you switch the block inputs to electrical ports, the block shows additional electrical reference input ports. The additional electrical reference ports are associated with the individual phase voltages that connect to the high-side switching devices in the Converter (Three-Phase) block and the negative DC voltage common to each low-side switching device in the Converter (Three-Phase) block.

Ports

Input

expand all

Physical signal ports associated with the gate terminal of the Converter (Three-Phase) block high-side switching devices.

Dependencies

To enable this port, set Gate-control port to PS.

Physical signal ports associated with the gate terminal of the Converter (Three-Phase) block low-side switching devices.

Dependencies

To enable this port, set Gate-control port to PS.

Conserving

expand all

Electrical conserving ports associated with the gate terminals of the Converter (Three-Phase) block high-side switching devices.

Dependencies

To enable this port, set Gate-control port to Electrical.

Electrical conserving ports associated with the gate terminals of the Converter (Three-Phase) block low-side switching devices.

Dependencies

To enable this port, set Gate-control port to Electrical.

Vector output port associated with the multiplexed gate signals. Connect this port to the G port of the Converter (Three-Phase) block.

Electrical conserving port associated with the A-phase for the high-side switching device of the Converter (Three-Phase) block.

Dependencies

To enable this port, set Gate-control port to Electrical.

Electrical conserving port associated with the B-phase for the high-side switching device of the Converter (Three-Phase) block.

Dependencies

To enable this port, set Gate-control port to Electrical.

Electrical conserving port associated with the C-phase for the high-side switching device of the Converter (Three-Phase) block.

Dependencies

To enable this port, set Gate-control port to Electrical.

Electrical conserving port associated with the negative DC voltage common to each low-side switching device in the Converter (Three-Phase) block.

Dependencies

To enable this port, set Gate-control port to Electrical.

Parameters

expand all

Whether to expose PS or electrical control ports.

Model Examples

Compatibility Considerations

expand all

Behavior changed in R2021b

Extended Capabilities

C/C++ Code Generation
Generate C and C++ code using Simulink® Coder™.

Introduced in R2013b