MATLAB Examples

# Example 11.5.1. - Sample Matrix Inversion.

In this example, we study the SMI adaptive beamformer and the loss associated with the number of snapshots used for training. SMI adaptive beamformers are produced with sample supports of K = 1.5M, 2M, 5M and 10M. Consider a ULA with M = 20 elements with an interference source at and a power of 50 dB. The thermal noise has unit power: .

Copyright 2016-2026, Ilias S. Konsoulas.

## Workspace initialization.

clc; clear; close all; 

## Signal definitions.

M = 20; % Number of Array Elements. K1 = 1.5*M; % Number of Signal Snapshots for Test Case #1. K2 = 2*M; % Number of Signal Snapshots for Test Case #2. K3 = 5*M; % Number of Signal Snapshots for Test Case #3. K4 = 10*M; % Number of Signal Snapshots for Test Case #4. MC_Runs = 100; % Number of Monte-Carlo Runs. lambda = 1; % Incoming Signal Wavelength in (m). d = lambda/2; % Interelement Distance in (m). phi_s = 0; % Target azimuth angle in degrees sigma_s = 1/sqrt(M); % Target signal power so that M*sigma_s^2 = 1; phi_i = 20; % interference angle in degrees INR = 40; % Interference #1 INR in dBs u_s = (d/lambda)*sin(phi_s*pi/180); % Target Normalized Spatial Frequency. u_i = (d/lambda)*sin(phi_i*pi/180); % Interferer Normalized Spatial Frequency. v_s = exp(-1i*2*pi*u_s*(0:M-1).')/sqrt(M); % Target Steering Vector. v_i = exp(-1i*2*pi*u_i*(0:M-1).')/sqrt(M); % Interferer Steering Vector. % Take 100 realizations of sample matrices R1, R2, R3 and R4 and average to % find smoother SINR loss curves: NSamples = 1e3; SINR_Opt = zeros(NSamples,1); SINR1 = zeros(NSamples,1); SINR_1 = zeros(NSamples,1); SINR2 = zeros(NSamples,1); SINR_2 = zeros(NSamples,1); SINR3 = zeros(NSamples,1); SINR_3 = zeros(NSamples,1); SINR4 = zeros(NSamples,1); SINR_4 = zeros(NSamples,1); 

## Calculation of the true Interference-plus-Noise Autocorrelation matrix and its Inverse.

R_ipn = (10^(INR/10))*(v_i*v_i') + eye(M); InvR = inv(R_ipn); 

## Calculation of the Optimum Beamformer for a phi_s = 0 deg.

c_opt = InvR*v_s/(v_s'*InvR*v_s); 

## Monte-Carlo Runs.

Run the experiment many times and and average over the resulting SINR Factors.

 for k=1:MC_Runs % Uncorrelated unit power thermal noise samples drawn from a complex Gaussian distribution: w1 = (randn(M,K1) + 1i*randn(M,K1))/sqrt(2); w2 = (randn(M,K2) + 1i*randn(M,K2))/sqrt(2); w3 = (randn(M,K3) + 1i*randn(M,K3))/sqrt(2); w4 = (randn(M,K4) + 1i*randn(M,K4))/sqrt(2); % The interference (jammer) vector are generated by: i_x1=(10^(INR/20))*v_i*(randn(1,K1) + 1i*randn(1,K1))/sqrt(2); i_x2=(10^(INR/20))*v_i*(randn(1,K2) + 1i*randn(1,K2))/sqrt(2); i_x3=(10^(INR/20))*v_i*(randn(1,K3) + 1i*randn(1,K3))/sqrt(2); i_x4=(10^(INR/20))*v_i*(randn(1,K4) + 1i*randn(1,K4))/sqrt(2); % The sample interference-plus-noise signal x_i+n is generated by: iplusn1 = i_x1 + w1; iplusn2 = i_x2 + w2; iplusn3 = i_x3 + w3; iplusn4 = i_x4 + w4; % Sample Autocirrelation Matrices: R1 = 1/K1*(iplusn1*iplusn1'); R2 = 1/K2*(iplusn2*iplusn2'); R3 = 1/K3*(iplusn3*iplusn3'); R4 = 1/K4*(iplusn4*iplusn4'); InvR1 = inv(R1); InvR2 = inv(R2); InvR3 = inv(R3); InvR4 = inv(R4); %#ok<*MINV> c_smi1 = InvR1*v_s/(v_s'*InvR1*v_s); % SMI Beamformer computed for phi_s = 0 deg & K1 = 1.5*M snapshots. c_smi2 = InvR2*v_s/(v_s'*InvR2*v_s); % SMI Beamformer computed for phi_s = 0 deg & K2 = 2*M snapshots. c_smi3 = InvR3*v_s/(v_s'*InvR3*v_s); % SMI Beamformer computed for phi_s = 0 deg & K3 = 5*M snapshots. c_smi4 = InvR4*v_s/(v_s'*InvR4*v_s); % SMI Beamformer computed for phi_s = 0 deg & K4 = 10*M snapshots. angle = -90:180/NSamples:90-60/NSamples; Opt_Beam_Pat = zeros(NSamples,1); Conv_Beam_Pat = zeros(NSamples,1); for n=1:NSamples u = (d/lambda)*sin(angle(n)*pi/180); v = exp(-1i*2*pi*u*(0:M-1).')/sqrt(M); % Azimuth Scanning Steering Vector. SINR_Opt(n) = M*sigma_s^2*v'*InvR*v; % max SINR for Optimum Beamformer (11.3.12) SINR_1(n) = M*sigma_s^2*((v'*InvR1*v)^2)/(v'*InvR1*R_ipn*InvR1*v); % (11.5.4) SINR_2(n) = M*sigma_s^2*((v'*InvR2*v)^2)/(v'*InvR2*R_ipn*InvR2*v); SINR_3(n) = M*sigma_s^2*((v'*InvR3*v)^2)/(v'*InvR3*R_ipn*InvR3*v); SINR_4(n) = M*sigma_s^2*((v'*InvR4*v)^2)/(v'*InvR4*R_ipn*InvR4*v); end SINR1 = SINR1 + SINR_1; SINR2 = SINR2 + SINR_2; SINR3 = SINR3 + SINR_3; SINR4 = SINR4 + SINR_4; end % Average out the calculated SINR sums: SINR1 = 1/MC_Runs*SINR1; SINR2 = 1/MC_Runs*SINR2; SINR3 = 1/MC_Runs*SINR3; SINR4 = 1/MC_Runs*SINR4; 

## Plot the corresponding Beampatterns.

figure('NumberTitle', 'off','Name','Figure 11.22'); plot(angle,10*log10(real(SINR_Opt)),'b',angle,10*log10(real(SINR1)),'r',angle,10*log10(real(SINR2)),'g',... angle,10*log10(real(SINR3)),'k',angle,10*log10(real(SINR4)),'c','LineWidth',1.5); title([' SINR Loss in SMI Adaptive Beamformer. '; 'Optimal (blue), K=1.5M (red), K=2M (green), K=5M (black) and K=10M (cyan).';]); xlim([-90 90]); ylim([-10 2]); grid on; xlabel('Angle (deg)'); ylabel('Power (dB)'); 